Search results

Thanks - the breather pipe is missing on the front axle and I think it's blocked up, there was a little bit of pressure when I opened the filler plug and a bit of leaking. The rear axle seems OK and the breather pipe is intact, but I thought it best to do both at once.

Morning all, The breather on my front axle is knackered, I suspect the rear breather is too - I've got a 1990 Defender 110 that started life as a V8 (Salisbury on the rear) - can anyone advise the part number for the breathers? Also, what's the correct oil for the axles? I figure I might as...

Lovely job - thanks - I'll give that a look and report back

Whereabouts is the switch? Save me going down a google wormhole!

Evening all, Hoping someone can point me in the right direction - the brake warning light has come on on the dash of my 1990 Defender 110 - I've checked the handbrake, that's working fine, and I've checked the brake fluid levels, they all seem fine. Any other typical issues that might cause...

So my 200tdi is shagged, and I considered sorting myself, but in the end I've elected to have a pro sort it for me and build me a new one. Peace of mind of a proper job without mistakes and getting the wheels turning sooner drove me to that decision

Just to add, the hardest part was getting the heater box out of the engine bay, once it was out, it was quite straightforward to replace the heater matrix and give the whole thing a general service. For a days faff and 30 quid on the new matrix, it's worth a punt to see if the OG heater can...

Good afternoon all, I'm ideally looking for a 200TDi short engine to help get my poorly 110 back up and running. I'd also be interested if you have a complete 200TDi engine (disco or def), but only if I could see it running. East Anglia would be ideal, though I'll consider further afield...

Thanks everyone, I'll get the serial numbers off the gearbox and see if that confirms what I have. I think I've got a defender lt77 and bellhousing and disco 200tdi with disco flywheel, but I'll confirm 👍🏻

I'm so confused 😅 I looked at Richards chassis, they sell an na / td / 200tdi chassis, and the defender 200tdi and disco 200tdi use the same block. So is the 4 inches difference just down to the bell housing and flywheel housing? So if I ensure my flywheel and bell housing are defender, I...

Yeah, I'll have a scrabble around at the weekend to get some numbers 👍🏻

So the "second" gear lever is closer to the engine than the main one for a disco? Mines the "normal" layout for a defender, I just don't know for certain if it's lt77 or lt85

Thanks - from what I could see, the disco variation of the lt77 had the high / low / diff lock in front of the gear stick? My secondary gear stick is behind the main gear stick, but that doesn't rule out its running an Lt85 I guess o_O Thanks for your reply. No, I didn't do the conversion, was...

Yep, my reverse is left and up, having had a quick look a think it's going to be a lt77, as the lt85 looks a lot different. is there an easy way to tell the difference between disco and discovery Bell housing and flywheel housing?

No worries - it looks as though the serial number will help me ID whether I have the 77 or 85. I'll do some homework on whether it's the dimensions are the same and just the gearing is different. just on my original Q, aren't the engine mounts different between the chassis then?

Hmm, well, I've googled and the lt95 was a 4 speed, and mine is a 5 speed, but I suppose it could be a lt85 - any idea how to tell the difference?

Hi all, Apologies if this has been covered before, I've had a bit of a hunt around and haven't been able to locate a similar thread. My Defender 110 needs a replacement chassis. It started life as a V8, but is currently running a 200tdi from a Discovery, and I can only assume it's running the...

The market for defenders is properly tanking at the moment, I contemplated selling mine to buy one already on a galvanised chassis etc, but the resell value of mine is dreadful, so I'm sticking with it. I've watched a few go on ebay recently, I saw a total rotbox with no mot sell for 6k...

Thanks both, I'll whip the sump off and take a look, though I might be too far gone anyway 😅

Evening all, I'm struggling to find a definitive answer - I have a disco 200tdi and an lt77 gearbox (though I don't know if this was a defender or a disco one, if that matters). Can the ladder frame be removed without taking the engine out? TIA