Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. norfolk 1

    td4 dying new car wanted

    inner section the part the bolt goes in
  2. norfolk 1

    td4 dying new car wanted

    retaining nut was removed before trying to attach middle part of tool.before inserting bolt into it
  3. norfolk 1

    td4 dying new car wanted

    will give them a call
  4. norfolk 1

    td4 dying new car wanted

    yes i did it will grip but not enough for centre bolt to remove pump
  5. norfolk 1

    td4 dying new car wanted

    well my td4 is leaking diesel from tank area at rear and engine.went to try and remove high pressure pump with special tool.which is great bit of a strip down eventually to pump.take out a cover with an allen key.with special tool you screw in outer section to keep everything flush.try screwing...
  6. norfolk 1

    Freelander 1 2006 TD 4 free to Freelander nut.

    im looking for a td4 because mine is dying with a massive diesel leaks.
  7. norfolk 1

    bearmach hawkeye ba5068????

    yes values seem good when stationary but when im out and driving i have the problems.i had diagonstic on today and was checking live feed as much as possible when the engine light came on 6 times in 30 miles and 50 mph was top whack in top gear.i was amazed at how erratic the voltage readings were
  8. norfolk 1

    bearmach hawkeye ba5068????

    be trying the multi meter there tomorrow too.move the plug around see if its all corroded
  9. norfolk 1

    code p1470 no info

    will be trying that first thing tomorrow.bizarre that it goes like stuff off a shovel at times and will rev to 4000 no problem
  10. norfolk 1

    bearmach hawkeye ba5068????

    one thing i have noticed looking at hippo vids is my fuel pressure sensor readings are all over the place.when car is at standstill with key on but not started its .5.when ticking over its 1.28 but when im driving it with diagonstic the readings are all over the place they go as low as .8 but...
  11. norfolk 1

    bearmach hawkeye ba5068????

    so im going to stick with this launch creader professional crp123,it seems to be more enlightened than i am.if i ever get this car sorted im going to keep it forever
  12. norfolk 1

    code p1470 no info

    ok right thanks,now then whats the best way to check them
  13. norfolk 1

    capacitor 1????what is it?

    right thanks for the explantion.learning more day by day
  14. norfolk 1

    capacitor 1????what is it?

    looking through some readings i took from car earlier i noticed capacitor 1 reads 79.15 volts???what is capacitor 1??79.15 volts seems extremely high
  15. norfolk 1

    bearmach hawkeye ba5068????

    very interesting i have the same problem with my fbh but what is capacitor 1 as the reading i have for that says 79.15v ????
  16. norfolk 1

    code p1470 no info

    got loads of details and checked lots of bits with a launch crp123 reader.came up with code as i left it plugged in and was out for a run in the car.it did say it didnt have info on fault code so if any body knows what it is please let me know
  17. norfolk 1

    Freelander 1 NOISES

    sounds like the noises ive had in freelanders which disappeared when i fitted new wishbones
  18. norfolk 1

    bearmach hawkeye ba5068????

    yep im having trouble with the ones i have here they seem to cover bits i dont need.none of them do fuel pressure so trying to find one which would give me all the info i needed for a 04 facelift freelander
  19. norfolk 1

    sediment tank info needed

    thanks artic 2 thats answered all my questions,i know now that previous owner hasnt put it together wrong and one less problem in the equation,thanks alot
  20. norfolk 1

    sediment tank info needed

    no i delved into there on the front garden in the rain so didnt think of taking pictures as i was checking to see if all was ok in there.
Back
Top