Search results

Hi, Has anybody got any tips for a good place to go to get a new windscreen? Mine's got a dirty great crack across it an the MOT is looming! The Disco's a '98 300Tdi and I'm near Crewe. I got a quote from Auto Windscreens who said £266. Thinking that that sounded a bit steep, I got on to...

Now you'd think that fitting a steering guard on a '98 TDi wouldn't be too taxing wouldn't you? It's only 4 bolts FFS. The bumper mount bolts came out a doddle, then I hit a snag. The back end of the guard mounts onto the center bolt that goes through the chassis member that the panhard rod...

Afternoon all, I realise this is a bit like asking how long a piece of string is 'cos there's a stack of variables that effect it...but, just as a general rule of thumb, what's the typical mileage that you would expect to get out of a clutch on a 300Tdi Disco? Cheers.

Mornin' all, I was looking at how to take the rear door trim panel off, ('98 Tdi), without breaking all the plastic retainers the other night. The book says to take off all the bits that screw through the panel, (Cor, wouldn't have thought of that!:) ), then use a trim removal tool to remove...

ok, ok, I know what you lot are like. There's a wide variety of anatomically unpleasant places I could put it but I'm not going to go there! :D I'm planning to fit a tank guard with a removable drop plate on it to my Disco, ('98 300tdi), so I've been giving some thought to the electrics. It...

Mornin! Just bought myself a '98 300tdi Disco. Needs a few odds and sods sorting but generally looks pretty solid. Anyhow the oil cooler pipes are leaking at the rubber/metal joint. I'd like to swap them out so here's the question, with the engine stopped, (obviously! :) ), does the oil in the...

Hi, I've done a bit of digging around but haven't found anything specific. Anybody know what range of oil pressure to expect on a 300 tdi? Thanks, Al.

Hi all, just joined up in the hope I can get some good advice here. I've just disposed of "Rusty", a 91 V8 Rangie, who really lived up to his name. Still, I own a welder so it wasn't that that got him, it was an engine out job that I finally baulked at. Just don't have the time. So now I...