Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. P1Darbs

    L322 Ride Heights

    Here's an update for those who are suffering with the same symptoms. I removed the nearside front connection serveral times cleaned & replaced drove it & had all the dash looking like Christmas... HVAC failed Air Sus failed ABS etc... plugged in my AUTEL MK808 & cleared faults, now this machine...
  2. P1Darbs

    L322 Ride Heights

    How strange I have the exact same issue... 2004 L322 3.0 Td6 great truck but now having to play this silly game. Did you find the problem. Maybe its a wiring fault? Left nearside front 51.7 volts????? I have plugged in a couple of replacement sensors (used) they are throwing 50 to 69 volts ...
  3. P1Darbs

    Transfer box in neutral

    All sorted. I removed the transfer motor. powered it up (12v) to spin it to line up with the spline notch on the transfer shaft (which was actually at 7 O'Clock rather than the suggested 11 O'Clock). but it has worked and the car is running fine again. I will be buying some transfer oil &...
  4. P1Darbs

    Transfer box in neutral

    HI everyone, My L322 3.0L Tdi 2004 was jacked up this afternoon to change brake pads. I put the car into Neutral. But now the car has stuck itself there in neutral. I can shift the car through P,R,D etc... but no movement and I can hear what sounds like synchro mess clashing ie. not mating up...
  5. P1Darbs

    Recommendation for l322 TD6 diagnostic tool.

    No but I did use my mate Autel Maxidas 708 pro & it has worked after several attempts. But I’m still looking for the correct machine/tool
  6. P1Darbs

    Always Happy, Living the Dream.

    Always Happy, Living the Dream.
  7. P1Darbs

    Recommendation for l322 TD6 diagnostic tool.

    Did you get a scanner that will calibrate the suspension?
  8. P1Darbs

    Recommendation for l322 TD6 diagnostic tool.

    Not sure if you got it sorted but I know that my mate has Autel MaxiDas 708 that does calibration & I have used it on mine. There is one on the iBay £350 but it is a dated system now and has been replaced think by the 908Pro?? I am looking at buying icarsoft CR Max and will be be speaking with...
  9. P1Darbs

    2004 L322 4.4 Petrol

    LMAO I hear you although they do look good though... My real issue is the cost of these vehicles vs the amount of issues build quality. I drive a 911 Carrera 2S mostly, so was looking for a winter practical car for not a lot of money. Always loved the RR so why not but... i live just outside the...
  10. P1Darbs

    2004 L322 4.4 Petrol

    OK good advice... do you think the M62 is better than the Jaguar unit?? or should i look at the supercharged RR Sport? what would you do?
  11. P1Darbs

    2004 L322 4.4 Petrol

    Well congratulations on that job, I only have the M57 engine straight 6 BMW which is a little easier to work on.
  12. P1Darbs

    2004 L322 4.4 Petrol

    OH S*** Yes BMW Straight 6 Diesel... that's clearly the V8 is that yours??
  13. P1Darbs

    2004 L322 4.4 Petrol

    Yeh ok, not sure if my diesel is any better on fuel though?? so i was thinking at leas id have more ;power & better sound track
  14. P1Darbs

    2004 L322 4.4 Petrol

    Whats your thoughts & advice please. I am considering a 4.4 Petrol seen a cheap one so wondering if it would be a better drive than my current TD6 & if it would actualy be better on fuel? anyone know if the later 4.4 say 2006 onwards has better fuel economy than earlier models ? Thanks P1Darbs
  15. P1Darbs

    Always Happy

    Always Happy
  16. P1Darbs

    Dianostic tool

    What you got?
  17. P1Darbs

    Dianostic tool

    Thank you I will look into that.
  18. P1Darbs

    Dianostic tool

    Ok thanks for that reply I’ll keep searching
  19. P1Darbs

    Dianostic tool

    Any advice on what is the best diagnosis tool for a 2004 L322 td6 I have Autel 808MK but it won’t allow suspension calibration on the early L322 only from 2006 to 12 So I guess I can buy a diag tool cheaper than a newer RR at the moment anyway I am replacing all the height sensors due to...
Back
Top