Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    Landy Downunder.

    Another one here in melbourne freelander 2 td4 and a disco 3 tdv6
  2. M

    Enginer rebuilt now to clear codes

    So after the crank destroyed itself therefore a full rebuild all is good except it wont start. I have read the error code and most of them point to the crankshaft position sensor. I have checkex all the plugs and the voltage to the sensor and all appear ok, 4.5volts to sensor an about 14-15...
  3. M

    New user

    Thanks. We have to be loony to like these things
  4. M

    Disco 4 problem. Stereo climate and internal indicators not working

    Had a similar issue with my D3. After pretty much pulling the front end apart discovered the loom from the gearbox run very close to the exhust. When the car was hot it was enough for the insulation to break down and short. Only did it when it was hot. Re wrapped and re clipped in place and al...
  5. M

    Disco 4 problem. Stereo climate and internal indicators not working

    Had a similar issue with my D3. After pretty much pulling the front end apart discovered the loom from the gearbox run very close to the exhust. When the car was hot it was enough for the insulation to break down and short. Only did it when it was hot. Re wrapped and re clipped in place and al...
  6. M

    New user

    Hi all, New user to this site although i have used it before as a visitor. Just finishing of the rebuild of a freelander series 2 td4 engine in the wife car which has been a bit of a challenge at times. Also have a discovery 3 tdv6 which i have had eletrical issues with in the past but worked...
Back
Top