Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. W

    Possessed range rover sport 2008 2.7 tdv6

    So the possessed saga continues. I changed battery and everything was perfect so I thought, And then same things started happening . Now I have the same as before but to be more exact now if I turn lights on the car goes mental. Lights off everything fine. Lights on gear level selection...
  2. W

    Range rover 2008 light switch

    sussed it. Whole console popped out and changed it
  3. W

    Range rover 2008 light switch

    Hi Quick question how do I get the light switch out on a 2008 rr sport . Its the switch and dimmer in a small square panel . Does it pop out ? Any suggestions would be great Thanks John
  4. W

    Possessed range rover sport 2008 2.7 tdv6

    HI Thought I would shed light on the possessed Range Rover sport. Had a lot of advice on different forums and facebook and took the battery to get it tested. Even though it showed 12v it ha=d failed inside and had no power. Not sure how that works but I replied the battery and very issue I...
  5. W

    Possessed range rover sport 2008 2.7 tdv6

    Yes thats first things i will try tomorrow
  6. W

    Possessed range rover sport 2008 2.7 tdv6

    where is earth strap connection on rr sport 2008? Sure ill find it but just for a good starting point thanks
  7. W

    Possessed range rover sport 2008 2.7 tdv6

    Going to attack the earth cable. Ive not been under yet but any pointers as where it is as battery cable just disappears down the back of battery. Progress Fitted new brake switch and done nothing. Checked all light bulbs. Have just measured for voltage from negative terminal to body...
  8. W

    Possessed range rover sport 2008 2.7 tdv6

    Thanks. Ive a new brake switch to fit and an earth leakage testing kit so attacking the possessed beast tomorrow Seems to be when lights are switched on or auto then I can select drive without foot on brake. Also lights off everything ok lights on nothing works as it should
  9. W

    Possessed range rover sport 2008 2.7 tdv6

    HI Any thoughts on the following . The issues started in this order 1st Rear tail gate kept opening on its own and at same time had every light on dash light up for transmission failure and lowered suspension. Tail gate switch was broken and full of water which has been changed now and this...
  10. W

    fuel tank cradle

    yes the one on car failed mot as its hanging off basically. Rover give a 10 week lead time to order. Going to get one from Lithuania as car now stuck in UK with petrol tank hanging off
  11. W

    fuel tank cradle

    yes ive seen them thanks called every dealer and scrap yard i can find. Only option to order from lithuania and wait i think Thank s
  12. W

    fuel tank cradle

    range rover sport 2008
  13. W

    fuel tank cradle

    Hi Trying to locate part wfn500021 fuel tank cradle . Any ideas New or used Thanks in advance
  14. W

    floor trim

    Just realised these are for the outer sills. I need the ranger rover ones for the inner sill
  15. W

    floor trim

    Great thanks thats exactly what i needed
  16. W

    floor trim

    HI Any ideas what the metal floor strip is called. Its kind of brushed steel says landcover. Its the floor strip on entry both sides of the car range rover sport she 2008 Need to know where I can order replacements Thanks in advance
  17. W

    Breather pressure

    Yep that’s all sorted.
  18. W

    Breather pressure

    Forgot to say timing i have just set at the far end of what i can turn the camshaft to. Should i try changing this to get it running smoother ? Ive messed about a bit but doesn't seem to do anything
  19. W

    Breather pressure

    HI So I've just started running it in today. Could it be that I need to run the new rings and piston in for longer to get them seated properly as there seems a lot of smoke coming out and really don't want to have to start again !!!!!!! Thanks
  20. W

    Breather pressure

    HI Recon head and no exhaust is fine. Im running it in so the question is during run-in would the pressure be more while the rings are seating properly thanks
Back
Top