Search results

I've been doing that to no avail, I think this one might be stuck fast.

Is there any way to free it off with out taking the box off?

Cool, just got to order all the bits now. Hopefully it sorts the problems, really don't fancy doing the job twice if it turns out to be the gearbox rather than clutch.

How much of a ball ache is a clutch change on a 1.8 facelift FL1? Is it doable on the drive without an engine lift? Recently when the engine is warm is getting impossible to select 1st and reverse is always grindy unless I select neutral first. Its totally fine when it's cold though which I...

Hopefully I'll have chance to get looking at it tomorrow afternoon.

Both of those connecters on the towing loom are green and brown. I'm guessing the existing lighting plug was meant to connect to male socket on the towing loom and then the female goes into the light. So If my thinking is correct, I need the cut all of the plugs off and connect the existing...

The top pic is are the the plugs on my loom and the bottom pic is the connector on my lights, does anyone know what i'm supposed to connect to what?

Cheers, I'll get some pictures today. It's a shame you have to do this, I was kind of hoping to find an adapter or something.

Yeah it came in the right packaging. Whats odd is that the part number is listed on the LR website as compatible and it's on the BritPart site/catalogue but when I search Topix there is a similar kit but has a slightly different item number (still 13 pin though) and details the part I'm stuck...

Just been out to have a look and the rear lights work but the indicators don't. I'll get the rest of the towing wiring in and then I'll investigate as it might be down the fact that the loom is only half wired in. I'm still stumped by the odd plugs on the loom though, I really hoped that as...

Cheers Nodge, I'll get out tomorrow and check for the other harness.

I got caught in a shower as I was putting the bumper back on, theres a chance water got into the plug, I'll get under and check it out after work tomorrow.

The towbar wouldn't fit with the towing eye in place and I couldn't remove that without getting the bumper off. I'm glad I did it though as it was so much easier to get it off with a bit of extra room. Like a knob head though I can't remember if i actually plugged the lights back in, it was...

Thers a plug that going into a socket behind the drivers side rear lights. It's a genuine kit so it's meant to plug straight in.

Just found another issue, after removing and refitting the rear bumper to fit my tow bar the rear indicators now don't work. It never rains but it pours. At least I won't get bored this week.

This one fits into that socket and then into the lights on the other side before going towards the front and connecting to the battery.

I'm towing a caravan so I thought I'd do it properly and fit official 13 pin. https://rimmerbros.com/Item--i-YWJ500070

Evening, I'm trying to wire in the 13 pin tow bar electrics on a '04 plate FL1 and I've hit a bit of a brick wall. I've got the official Land Rover kit (part number YWJ500070) and it's meant to be plug and play, it was all going as per the guide (which is awful) until I got to the part that...

I can't find a receipt for it but it might have been done. I'm going to monitor it to see if the coolant goes down or changes colour, it looks perfect at the moment. Just done the spark plugs and air filters and they all looked like they were pretty recent, changed them anyway though as at...