Search results

just wondering if there is anyone around the eymouiter area with a nanocom to help me out with a couple of problems setting the airbag height and checking the rf on the keys thanks in advance

that is good news as it cost 27euros import duty and taxes

thanks have ordered from lrdirect reasonable prices and the import duties were not that bad

i will have a look i was just trying to source new ones just to be safe thanks

Does anybody know if there is an equivalent to the bolts ANR6920 and RYG501550 for the radius arm i cannot find them cheaper than 14euros on the continent? cheers

the receiver is clean and free of corrosion and i cleaned the earth to but short of trying a different one i do not know. and in ref to the airbags the were changed 5 or 6 years ago but it is a problem with the height i think one side is slightly higher than the other and i have no way of...

Hi My disco has decided to be a right pain in the backside, firstly the key fob stopped working tried new battery that worked for a while now nothing so have used the EKA to keep her going, the rear air started going down on it's own so changed the sensors thinking this would solve the problem...

battery disconnected. oh i will try and knock it thru bit wet and windy today will try tomorrow. cheers

will give it a try i have nothing to lose

Hi all have just started to replace the height sensor on a disco 2 (nightmare) bolts corroded and the one on the radius arm has sheared so i decided to drill it out and now the drill broke inside the hole so at the moment i have a zip tie holding the sensor arm in place any ideas? i also noticed...

Hi all have just started to replace the height sensor on a disco 2 (nightmare) bolts corroded and the one on the radius arm has sheared so i decided to drill it out and now the drill broke inside the hole so at the moment i have a zip tie holding the sensor arm in place any ideas? i also noticed...

Hi, just joined. currently driving a disco2 and always after advice on keeping the old girl going.