Search results

Done one wheel up test and vcu ok.

Thanks, was just reading up on another post online about same issue, will see what crown etc looks like when I take it off, hopefully new deal and seal gasket.

Leaking at 6 o'clock

Afternoon, When washing chassis noticed a small amount of oil coming from the flange that goes to the prop.. going to check breather hose case it blocked , if breather clear is this an easy fix ? Replace oil seal ? Or is there anything ? Thanks

Tailgate door not opening was fine last night.. have managed to get panel off but drawing a blank.. disconnect battery which was a possible solution online.. and now drivers door doesn't lock now.. worked before I disconnected battery ..

Is there any knowledgeable members arounds north ayrshire, Scotland , need some help with our 2003 freelander , teething problems Thanks

Ah right.. Thanks for that

Thanks yeah looks like for like small white conection for the hdc to undo mine's is 2003 per face lift would be coming of a 2002

Small what looks like 10mm bolt just under the hill decent trigger it's under the gaiter

Another question , there gear knob with the hill decent trigger can this be changed out like for like as the gear knob is threaded and turning notice @ that there is a small but just below.

Yeah that was my first post of call two bird and all that ..cheers

Thanks colwill check them out

On saying that there is a little steering wheel wobble at about 50mph so may well be driveshaft

Thanks, when driving straight there's no knocking when going over bumps would it not do then too if it was drive shaft?

Nope nothing nice and straight

Yes motor move through all settings and have it set at zero for adjusting

Sorry should have said , it the beam adjustment using the two screws.. motor works. Cheers Nodge68

When turning left on an uneven road there's a knocking noise from drivers side front. Drivers headlight appears high have adjusted it down but only goes down so far ? Thanks

Thanks will look in to one wheel test.

Read on here that if it's hot to touch then there's a major issue , checked after long drive and it was ok to touch