Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Kev12

    Disco 2 Yet another hazards/inertia issue

    So I have trawled through all of the previous threads about hazards flashing & fuel pump not running. Engine cranks which rules out immobiliser, turning ign on unlocks doors and starts hazards flashing, lock/unlock ign on doesn't reset them only disconnecting battery does. So I have tested for...
  2. Kev12

    Head bolts loose? And other questions

    Hi all, I recently picked up a cheap 10P D2 with 240k miles that was pressurising the coolant. From a cold start you could remove expansion tank cap after 5 seconds of running and there would already be a lot of gas to release. So head is now off and I havent cleaned it up yet, but the thing...
  3. Kev12

    P38A p38 Chequer plate?!

    https://www.ebay.co.uk/itm/133947756246
  4. Kev12

    Weld through primer

    Never had a need for it before but I need to do a patch on my chassis. Have seen both zinc and copper versions, any recommendations? I see a few cans on ebay/Amazon including a upol one. Only got this 1 job for it so don't want to buy too much.
  5. Kev12

    Squeaky M51

    Picked up a cheap 525 a couple of weeks ago that has a bit of a squeak from the belt area. Alternator looks newish and spins nicely and I have replaced water pump, tensioner pulley and the idler but this hasn't fixed it. There's also a chirp when you switch the engine off. Does this sound like...
  6. Kev12

    Air tools

    Looking for opinions for my next purchase, either shears or nibbler. Any recommendations? (Cheap of course ;))
  7. Kev12

    New member

    Hi all Finally got round to registering, been a lurker here for several years as I (very) slowly rebuild my RRC. Its a 1989 that I have put a 200tdi into, but as I have left it to "mature" for 10 years or so outside pretty much everything else needs a going over too ;)
Back
Top