Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. R

    Disco 2 Checking wiring loom from XYZ switch

    Hi Chaps, just to let you know that I have not had time to dig about under the D2 but I will report back as soon as I have done so. Something for the Christmas hols in lieu of visiting aged relatives perhaps?
  2. R

    Disco 2 Checking wiring loom from XYZ switch

    Yep. To be fair to the bod, he seems to be receiving a great deal of grief from his firm which I will not detail and which is dampening his enthusisam for LR products!
  3. R

    Disco 2 Checking wiring loom from XYZ switch

    I'll be digging into it as soon as I can and will report back. Unfortunately, that's unlikely to be in the next couple of weeks - unless I become tremendously enthusiastic in the evenings - because my weekends are fully booked. However, I am very appreciative of your encouraging words. :-)
  4. R

    Disco 2 Checking wiring loom from XYZ switch

    I will be delighted to join you in the laughter - but mine will be from relief.
  5. R

    Disco 2 Checking wiring loom from XYZ switch

    The gear selection codes appear in the LCD until I select D and move away.
  6. R

    Disco 2 Checking wiring loom from XYZ switch

    Thank you. Having had several auto RR and now the D2 and hating the 'shunt' between D and R I am always very gentle when engaging D or R (no throttle pressure and pausing between the two). Hawkeye is reporting no infornation regarding the position codes, i.e. 'zeros' as far as I can remember...
  7. R

    Disco 2 Checking wiring loom from XYZ switch

    I have Hawkeye, not Nanocom. Indeed, I was thinking that I need to 'bell' the loom through whilst applying a bit of judicious wiggling. Needless to say, it's hooning down with rain here :-( I also doubt the diagnosis of FUBAR until I have proved that the 'box ECU is being communicated with...
  8. R

    Disco 2 Checking wiring loom from XYZ switch

    I haven't but the spanerer - who is very thorough - assured me that they did.
  9. R

    Disco 2 Checking wiring loom from XYZ switch

    2003 D2 is grounded with flashing M+S lights which appear when I start to pull away in D and gearbox selects 3. Hawkeye reveals P0705 14 as a hard fault. The XYZ switch has been replaced with a tested used switch but the fault persists. My workshop bloke recruited the help of a chum who is an...
  10. R

    Re-instating air suspension in an 04 D2

    Thanks Kevstar. Not worried about the discrete bits (pump, height sensors etc), it's the loom that concerns me. As it happens, I've been told that the pump has been removed :-( I appreciate that until I look at it I am whistling in the wind but I'm concerned that I might have to make...
  11. R

    Re-instating air suspension in an 04 D2

    Looking at a V8i 7 seater D2 that has been converted to coils as a replacement for my 03 TD5 D2 with air suspension. I know many have gone from air to coils but know of none who have reinstated air suspension. Sourcing discrete components is not, as far as I can see, an issue, but would it...
  12. R

    Webasto FBH?

    I can send you the Webasto installation manual for the Disco in pdf form. I doubt that it is small enough to attach to this post but I will check when I am at my PC. Regarding the plumbing: there are two hoses that are specific to the Webasto which, effectively, insert it into the primary...
  13. R

    Traction Control issue in 2003 auto D2 non-ACE with air springs.

    Thank you. [1] the dynamic readings, i.e. whilst driving, from the ABS sensors are identical. However, I have not observed the reading in a trigger situation. [2] the replacement hub was genuine and was supplied with the ABS sensor installed. [3] the symptoms are marginally better since...
  14. R

    Traction Control issue in 2003 auto D2 non-ACE with air springs.

    Traction Control issue in 2003 auto D2 non-ACE with air springs. The TC occasionally operates when the NSF wheel encounters a pothole or road hollow and engages the NSF brake with sufficient force to pull the steering to the left. Previously, the TC would operate randomly when 'making progress'...
  15. R

    Disco 2 TD5 air suspension lifted to full height and will not deflate

    EAC number obtained from LR @ Crawley. Impromptu class in decoding HEX given to the service manager :-) Replacement key cut and fob body with PCB transferred to that key and the starting problems have gone away. Ta Richard
  16. R

    Disco 2 TD5 air suspension lifted to full height and will not deflate

    That's very useful to know. In a way I'm glad that I was thinking in the right direction re. transponders. I was going to address any problems once the suspension was resolved. Thank you. Your alarm summary looks useful - sorry this is coming from a phone so I am not able to give it...
  17. R

    Disco 2 TD5 air suspension lifted to full height and will not deflate

    Gotcha, sorry. Just re-read my original words :-( You have a better memory than me. :) It seems that the intermittant starting may be related to my attempt to replace the fob portion (all the buttons had dropped out) of my spare key. I thought that the transmitter bit was just that and...
  18. R

    Disco 2 TD5 air suspension lifted to full height and will not deflate

    Hi Neilly. Erm, I'm not sure that I understand your question. Air suspension is now fixed. Regards Richard
Back
Top