Search results

yeah well its the curve in the door tops am worried about I mean I've got a English wheel in work but to make either side identical gonna be tough but if I could get the dimensions of the door tops I reckon it would be easier to work out where to curve the metal rather than fabricating something...

yeah well I figured the hoops would be simple but yeah the shark tooth rail, didn't know it was called this haha must of been inspired by a shark tooth, would be complex you could easy make your own but then you would have to make your own canvas and am useless at textiles or upholstery so would...

cheers for having a look for me on ebay that is what I need even though by the looks of it came off swb but will do to get the project started and means less fabrication for me to do hopefully i'll pick it up at a low price as am kind of on a budget once again thanks Neilly i'll keep you...

Have a land rover series 3 lwb ex mod or ffr and I want to do away with the truck cab roof and fit a mod canvas but I need the hood sticks for the set it costs between £450-650 which is abit expensive and I will still need to get the canvas cover. So I thought what about making the hood sticks...

thinking on making my own series 3 lwb hood sticks anyone have the dimensions if so message me would be ever so grateful ;)

series 3 twin fuel tanks perfect for bio-diesel setup!! ;)

This could be a good time for you to learn how to read wiring diagrams because it would make life so much more easier don't try guessing could potentially cause another problem. Get a test light check your getting a ignition feed at the switch. The black red seems like to me it could be the...

in that case then the easiest way to prevent horn from staying on is unplug each plug from alarm ecu one by one until horn goes out. then bell test (testing continuity with multimeter) the wires on that plug with the wires connecting to the horn then cut the wire at the plug. in some cases...

what I would suggest is disconnect battery negative first unplug alarm ecu and immobiliser leave it a good while about 30mins now in your vehicle you will have sensor these detect if anyone is trying to break in to your land rover or is actually in your land rover so they act as shock/motion...

Make sure you have removed the surface charge on the battery. Sounds like ingress water to me that Unless any one has messed with your electrics in the past it won't be a short. unscrew instrument warning light panel inspect wiring and terminals look for any corroded terminals or anything...

Was thinking about reverse bleeding anyone had experience doing it that way the principles of fluid dynamics state it would be easier doing it that way. Oh I didn't mention it has been converted to a 300tdi so it has brake vacuum feed on master cylinder could that cause the master cylinder to...

The only way to check switch is with a multimeter set it to test for continuity work the switch a couple of times in situ then take the switch out and check on the bench you'll know if it's the switch straight away. Your problem to me seems like a high resistance the wiring loom and...

Gravity feeding great when there's two of you when there's one can be abit awkward and Suppose I could of trapped air I mean everything mechanical is working fine I thought that myself seeing a you have to pump the pedal for it to go hard might try purging new fluid through entire front brakes...

so I've got series 3 109 with twin leading brakes at the front one day I noticed that the front brake lines were a bit perished and not serviceable so I decided to change them before all this the brake worked fine and there was a firm pedal however once I changed the brake lines and bled the...

new to landy zone joined to share green lane paths, off roading places and knowledge of land rovers

Liverpool