Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. RobertJ

    Td5 Defender won’t start anymore

    I have 2 90’ Td5’s one 10P and one 15P (MY2003). I went on holiday with the 10P and took the 15P ECU as a spare with me as the 10P Defender did sometimes cut off while driving (probably the 2 big transistors on the way out). Luckily I had my other ECU with me as my 10P ECU failed, so I...
  2. RobertJ

    Td5 does not crank, what have I missed??

    Ok, so my Td5 does not start. I’ve got: - running fuel pump - working injectors - no air - working starter - 11.5V on the ignition red-white wire when going to pos. III. - no volts on the wire on the starter side. - bleeping when turning the ignition (did it also when it still started). - Fobs...
  3. RobertJ

    Td5 RPM drops

    When revving the engine on a steady rpm, the rpm drops a bit after every couple of seconds an after releasing the throttle the engine idles for a bit an then also a drop in rpm is heard at which it will keep idling. I have recorded the sound with my iPhone: https://gofile.io/?c=Przdft I have...
  4. RobertJ

    TD5 does not fire up

    Hello, Asking for a friend. He has a ‘03 TD5 Defender which does not want to fire up. Starter is turning, and does start when spraying starter fluid into the EGR. I am thinking towards the fuel pump or the injectors like the o-rings or the injector wiring loom due to oil. What are your first...
  5. RobertJ

    Starter size (front bracket)

    Just a quick question as my new starter for my 2.5N/A won’t fit to the front bracket as where the old one did fit to. It should be the correct part (NAD500210). Can this do harm? And do you guys fit a ground cable from the starter itself to the chassis as well? Thanks!
  6. RobertJ

    Core plug cilinder head + camdhaft bearings

    I am rebuilding my complete engine for i’ve came accross 2 things which i would like your guys opinion on. First, when removing the core plugs in the cilinder head (hit one side with a screwdriver so they flip over) I think have damaged a metal tube witch is right beneath the core plug. It...
  7. RobertJ

    Series 3 88' doesn't brake 1st time

    I have a 88 with dual brake system including brake booster. Ik have replaced all 4 the wheel brake cilinders and the master cilinder and blessed the brakes and adjusted the shoes (locked them with the adjuster screw and turned the screw back until the wheel is spinning free). Brake booster is...
  8. RobertJ

    Starting issues 2.25 Petrol

    Hi All, I have a 2.25L petrol engine which won't start. I have add many new parts to it such as starter solenoid, distributor, etc. etc. The battery is fairly new (bought to start a 110 2 times when I bought it). Only the positive cable from the starter solenoid to the starter is old and the +...
  9. RobertJ

    Hydraulic Power steering on 110

    Hi All! A while ago I have bought a 2.5N/A 110 HT Defender (I know it is actually just named as a 110) in France. A very nice car with low milage, has always done her job on the wine yards. I am restoring her at this moment, getting the chassis galvanized, respraying, converting it into a soft...
Back
Top