Search results

i also checked just then the measurement between the gap in the body where the door would go- 88cm top and bottom

i have checked on the new door bottom and it is square, i did do 2x chassis outriggers a few weeks ago but the doors that were previously on there still fitted ok

got new door seals coming

hi doing a off road spec defender at the moment, decided to go with series type doors for simplicity, but they are seeming to be the opposite of this. bought from sp land rover spares as you may know they are a series door replica , previously the old standard spec doors fitted ok, with a...

this is the same isn't it? http://www.ebay.co.uk/itm/221762461911?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

do you have a link?

does anyone know the part number i need?

got from paddocks CGE500450

pretty sure they are original, they have the part number and e marking on them

bought 2x new britpart side window seals and filler strips for my truck cab as the old ones were perished, got round to fitting them today, laid them in the groove and they are too short, also tried stretching them after they were in a bucket of hot water but that didn't work either. am i...

this is a good picture for anyone who finds themselves in my situation in the future

ah get what your saying, thanks for the info

isn't that clutch area dry though? so shouldn't see any leaks there?

thanks jamesmartin, so I'm guessing its not a good idea to go poking any further up while cleaning? would it be a good idea to change the gasket or is it safe for a while yet?

ok will check, is that part off a different vehicle or is it something off the lt77? just can't see what area it is off?

is it normal for there to be such a big hole there though? its probably 1/2" wide

got a 1991 defender 90 , been doing some work on it at the moment, neatening everything up and went onto the gearbox today to start getting all the old gunk off it, i have found a hole in the bell housing area and don't know if it is standard of something which is damaged/cracked, i can poke a...

so it won't do the solenoid any harm leaving them linked?

hi, got a tmax split change setup and 2x batteries, got an intelligent charger the other day, i don't really do a lot of miles on the defender and it will sit for a week before being drove again, so i have got 2x looms going to outside the seat box so i can just quickly connect either the aux...

was going to put some 2x4 in before i take it out so i can just slide it back in hopefully