Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. tomhop

    300 TDI black smoke

    It’s started to use oil too, could it be the head gasket?
  2. tomhop

    300 TDI black smoke

    just bought a 1994 300 TDI 90, the guy said the previous owner to him put a boost pin into the engine to boost performance. When i am driving normally there is no smoke, but on first start up and when i first start to accelerate when moving off or changing gear i get a big black puff of smoke...
  3. tomhop

    coolant bleeding

    I know but I think I was just worried I hadn’t bled it correctly and that it was hotter than normal, but took it for a good drive and the temp gauge read normal and the fans blew hot air. Just being paranoid
  4. tomhop

    coolant bleeding

    just looking for confirmation that i have done this correctly. i dropped the coolant from my Td5 defender, flushed the system then refilled with fresh coolant. left the header tank cap off set fans to hot and released the bleed screw until i had a nice clean jet of fluid with no air then topped...
  5. tomhop

    help with filling holes in body

    Should have said I painted the silver chequer plate blue to match the rest of the body, I will see how long my shoddy painting lasts
  6. tomhop

    help with filling holes in body

    Transformation complete, looks a lot better in black, I also prefer the sleeker look without the snorkel etc.
  7. tomhop

    Safe power limit for standard TD5

    Alive tuning have nationwide garages that are “approved” by them that run their maps, I am taking mine to my nearest one which is a 3 hour round trip which I think will be worth it
  8. tomhop

    Why is my painting always ****

    Thanks for that, I have left the last 2 pieces for a couple of weeks now and the paint seems to be a bit harder to scrape off so maybe just needed to leave it longer, all the bits I am painting just now are small so I am just buying spray cans for everything, painting in a metal shed so it is...
  9. tomhop

    Why is my painting always ****

    I am in the process of painting my chequer plate body coloured to try and hide it a bit (don’t want to get rid of it as I like to throw my tools on top of the wings when I am working on it) My process was Wire brush and scotch bright pad them to scuff up the surface. Use panel wipe to degrease...
  10. tomhop

    help with filling holes in body

    Made a start to changing the colour of the front end grille and light surrounds, also fitted an A bar to shift the lights onto, bit of a pain trying to line up the bolts and have now realised I have to fit the lights to it before I fit the A bar so going to have to do it all over again, not...
  11. tomhop

    Defender 90 rear anti roll bar links

    We have all been there! :oops:
  12. tomhop

    help with filling holes in body

    Front end,
  13. tomhop

    help with filling holes in body

    Thanks dag019, I might try and paint the chequer plate in blue and see how it looks, if it looks crap will paint them black. have put an offer in on a second hand A frame on flebay. How easy is it painting the headlight surrounds etc?
  14. tomhop

    help with filling holes in body

    I also wonder about the grille and light surrounds being silver, I think they would look better black. What do you lot reckon?
  15. tomhop

    help with filling holes in body

    It does read like I was selling my Landy I hadn’t noticed, have now edited it
  16. tomhop

    help with filling holes in body

    Thanks for all the replies, the chequer plate is a contentious issue for me because I don’t like it but I am constantly throwing tools on them and don’t have to worry about scratching the wings, had thought about painting them but then would they look tatty quickly as the paint would get...
  17. tomhop

    help with filling holes in body

    i am not doing this to sell it, this is my own vehicle i hope to have for a long time. just want it the way i like it and not have the add on's that someone else put on it.
  18. tomhop

    help with filling holes in body

    Thanks for that, I have ordered a tube of it, if it works well I might try to remove the riv nuts on the wing and fill them too
  19. tomhop

    help with filling holes in body

    For me it looks a bit OTT, I am never going to drive it through the desert or do any deep wading. I am trying to strip it back a bit (previous owner had put a fair bit of extras on it) to get it looking a bit more original and IMO a bit smarter. Yes it was a Mantec snorkel
  20. tomhop

    help with filling holes in body

    Do you think it would look daft if I put a couple of stainless rivnuts on the windscreen holes with stainless bolts? Would clean up the corrosion and paint first
Back
Top