Search results

Has anyone got a TD5 centre console for sale? I don’t need the switches, just the console and the radio bezel.

I've got a TD5 90, I thought I'd bleed the clutch because the fluid looked a bit black, I've bled it, no air left, pedal feels fine but it's hard to get in to gear and near impossible to get it in reverse! New clutch master cylinders and slave last year! Any ideas?

I've got a TD5 90, the engine light keeps coming on, and when it does it feels like the engine is trying to stall itself, this happens for about a second or so and then back to normal! I've plugged it and no codes come up. Anyone have any ideas?

I've got an oil leak on the TD5 90, it looks like its below fuel pressure regulator and ends up dripping around the side of the bellhousing. The bottom of the starter is all oily too. I don't think it's Fuel as it feels too oily and the oil level is dropping too. I'll also add that above...

I've got a TD5 90, I've got an oil leak, it ends by dripping at the bottom of the bellhousing but seems to be running down the left hand side of the bellhousing and it's all damp and oil on the side of the sump and just above the sump too. The back of the engine is dry so I don't think it's...

I've got. TD5 90, and sometimes the engine check light and glow plug light won't light up on the dash when I put the key in which results in the car now starting. It will only start when I take out the ECU relay and put it back in. Then the lights come on and the engine starts. It's a new...

I've got a TD5 90 (R380 gearbox) and when selecting low range it works for a bit whenever you go to change gear or go over terrain it tends to jump out. I think it's the linkage but have no idea to what look for or what to adjust? Any idiot guides about?

I've got a TD5 90, sometimes the engine splutters while driving and sometimes won't fire up, it turns over but won't fire up! Also when trying to start it, I have no engine light or coil light, if I leave it long enough these lights will come back and it will start. Any ideas?

Does anybody know what/if there is a seal here! I'm not on about the rocker cover, but the bit below it? In line with the cam seal, just above the writing, you can see black stuff coming out, earlier today oil was seeping out. I've refit the rocker cover as I believe that was the fault but just...

I have a set of 235/85/16 General Grabber TR tyres, one is brand new, one is nearly new and the other 3 have plenty of tread left on, would anyone swap these for a set of 5 mud terrain tyres?

.

I've got a td5 90 and it won't stay in low range while off roading, it stays in for a little bit but then it slips out and slides back in to neutral. Any fixes?

So I've got a td5 90, I'm looking at preparing the engine for wading. Where abouts in the engine bay do I need to make water tight? I know I need to seal the snorkel and airbox in but what about the engine itself?

I've got a td5 90, what route have people put their breather pipes through and then how have you attached them on to your snorkel?

I've got a TD5 90 and sometimes, once or twice a month I get clutch/brake fluid dripping from my clutch pedal. Both the reservoirs don't seem to be going down. What could be the problem?

I've got. TD5 90 and the drivers side window motor has gone. Will one from a discovery 2 fit and work?

I've got a td5 90 on a 56 plate and the drivers side speaker isn't working! The passengers speaker works fine, I've tried the drivers side speaker on the passengers side and it works fine so it must be something to do with the wiring. I know nothing about the wiring, I've pulled the radio out...

What are people's opinions on front mud flaps on a defender? I've got a td5 90 and I can't decide whether to fit them or not?

Ive got a td5 90 with 16inch boost alloys. Currently on is 235/85/16, I would like a tyre that is a bit wider, what size will fit on the car without having any problems (ie rubbing on full lock) or without having to make any adjustments or modifications.

Ive got a td5 90, I keep getting a draft coming through the heater controls on the right hand side, or at least around that area, as well as the vent that air flows through when the air vent is open! I've changed the vent seals but it's still coming through, any ideas?