Search results

When looking at the live data, what should I expect to see that would point to a height sensor?

I'd put one of the three values in the wrong way. All sorted now and no leaks! Tank filled and up to height in around 5 minutes. Thanks for all the suggestions. Only slight issue now is that the front rises by itself to full height sometimes. Getting more frequent. Drive pack? Oddly it goes...

No faults. Yep, have to that apart and go trough it. Literally took one bit off at a time, replaced the seals then refitted. That's Saturday morning sorted. Anything in particular that stands out as being the cause?

Fixed the compressor! Took it apart, put it back together for the second time and now works. Something still not right though as the tank won't pressureise. Did the compressor test by holding my finger over the exit pipe and couldn't hold it there. Pipes going to and from the dryer have...

Tell me about it!

Thanks, I'll have a go tonight. Can't believe taking it apart and putting it back together would render it completely inoperable but I'll find out later I suppose.

Took it apart and it spins freely. Also hear a relay click when pressing compressor on but nothing. Anyone know which pins to manually test the compressor or whether I've shorted it?

Completely apart mate but did open up the brushes so it all went together. Just taking it apart again now to check

I've managed to turn my fully working eas until a completely dead eas! I was working fine but leaking from the block so last night rebuilt the block with all new o-rings. That all went fine. However, for some stupid reason I decided to see what the compressor motor looked like inside. Took it...

Thanks a lot for the suggestions. Island4x4 has one for £4.99 and a Land Rover one for £49 - is the LR one really good or the 'quality aftermarket' one really bad?!

I did think it may be the bags but it's been standing since Sunday and they don't look like they've gone down. Had been standing for 2 weeks when I got it (battery completely flat) and it didn't appear to be on the bump stops. Seems to struggle to get up to full height so I think it is the...

Thanks all Biketeacherdave- that would be very useful! thought there may have been some readily available for use with a standard obd cable but seems not.

Thanks. Good to hear zero rust is normal! Must be thinking of the classic? Thought i'd read it somewhere. Testing the output pressure of the compressor will hopefully tell me that. I was thinking of ordering a compressor kit anyway.

Evening chaps, Ended up buying a p38 over the weekend. Went to see it, turned out to be in really good condition, bought it. 1995 4.6 HSE Range Rover, Epsom Green, tan leather. Harmon Kardon audio, sunroof, memory seats and mirrors, heated seats. Pretty much zero rust which i thought was...