Search results

ok many thanks will remember less is best but hopefully i will not have to drill out disc crews again with the use of copaslip.

I did put some copaslip on my new brake disc retaining screw threads so it will be easier to remove next time as they where problematic last time i wanted to remove them.

ok thats good to hear i was worried somebody might be putting on the braking surface when they said on the face of the brake disc.

They but copaslip on there brake discs wow thats insane you are right it is a very very bad idea to put any thing at all on your brake discs especially grease it sounds like they are trying to kill themselves as this would have a very serious effect on there braking performance.

Many thanks for reply yes all done now as i received my new screws this morning from ebay i brought the high tensile ones and they fit great and thanks i did use some copaslip so hopefully will come of easier next time seems a lot better having the allen key fitment these are the ones i used...

many thanks for reply yes you are correct m6x12mm as i find some on website as well put i ordered some from ebay high tensile ones as do lot off road

Hi i was wondering if any one could tell me the screw/bolt size for the screw that holds the front discs and rear drums many thanks

replaced the 3 diff mounts as i was getting banging noise when changing low gears,but fine now no more banging noise drives great with the new mounts fitted,i did ask at garage for a quote to replace the 3 mounts for me and they told me it would be 4 1/2 hours labour charge but the job only took...

I will keep a eye on your post to see how you get on with the stc1914 bolts i was looking on ebay and there was an advert on there for stc1914 bolts and they claim that Correct High Tensile Bolt for caliper slides. All Freelander 1 All Discovery 2 P38 Definitely NOT from Britpart...

Fitted a new fuel tank cradle as old one had rotted out so purchased one from ebay for£165 as dealer wanted £300 seems very good quality. painted my rear drums black and also fitted some uprated headlight bulbs and side light bulbs.

I also wanted to change my caliper bolts when changing my discs and pads and new pads didn't come with bolts and i cant justify paying £12 per bolt for my 2001 freelander when the other bolts are 50p each. And Alkaja stated that he used the stc1914 bolts which are 50p each on ebay on a 2004...

I have Bridgestone Dueler H/T 689 215/65/16 really like them paid £277 for a set of four fitted.

Hi yes vactan is a rust converter protector used for many years in the marine industry used on boats so easily available in any good marine shop i have used for many years i find it the best rust converter protector available and it only costs about atenner for a litre bottle that lasts for...

Thanks for advice i thought about riveting on a plate just damage is right on the lip were it bends in on the recess and ever were feels so soft and crusty i have applied lots of vactan and painted with hammerite so should be ok for now and i will try to find a replacment tailgate in the long...

Many thanks for advice on removal now removed i can see this is totaly rotted and a uneconomical repair is a lot more involved than paint repair i did try rubbing down and just big bits of rotted steel fall out so i will be on the look out for a replacement tail gate rot free in 696 paint code.

Hi i brought my 1st freelander last week which runs great but i have noticed a couple of issues with corrosion under the tailgate handle and the fuel tank cradle is rusting away. not to worried about fuel tank cradle as i cant get a new one and replace but was wondering how difficult to remove...

Thanks for reply and heads up on the test have tested everthing ok but i have ordered 4 tyres of the same type being fitted next week as current tyres are quite low anyway i have ordered 4 firestone destination hp tyres as seemed quite decent and only cost £68 a corner on tyre shopper...

Many thanks for reply yes the vehicle does still have it's vdu and all of its 4wd system intact i did measure tyres across and there are roughly the same size slighty bigger on back but i didn't measure the rolling diameter or do any wheels up test as this is my first ever 4wd and im not sure...

Hi all i brought my 1st freelander today really happy with it in great nick it a 2001 td4.Drove it home over 100 miles and drives fantastic no faults. The only thing i was concerned about was the tyres the front 2 are khumo kh17 and the back 2 are pirelli scorpions and i thought it wasn't a...

Hi im new here i picked up my first land rover today it a 2001 freelander td4 i drove it home over 100 miles and drives great no faults and in good nick. Dave