Search results

It's been a while but the saga was eventually solved so. I thought that I should post an update so anyone with the same issue can make sure that it isn't the same cause. I didn't find the fault. The fault found me. I was still having the problem of not charging properly, No ignition or oil...

Thanks Mystery. So if the Ignition / Alternator warning lamp is fed straight from the Battery, regardless of the condition of the alternator, it should light up with the ignition on prior to starting. That means that I still have another issue on top of the issue with the alternator. I'll...

Both. The oil and ignition light should come on before starting the engine. They don't.

She's a 96 300. My wife tells me that my last post was a bit arsey. Apologies, I didn't mean to come across that way. Blanking off the EGR is on my to-do list but is nothing to do with my current situation. Thanks to your input I'm reasonable confident that the wiring is not an issue. My...

Ahhh. That clears that one up then. I don't have a rev counter. I do have an EGR that needs to sense engine speed. So that is connected to the correct terminal. I didn't know that the black block was a suppressor. I do now. Does the EGR need one or should I just remove it? The bulb was...

Thanks tottot. I have 2 dead alternators. One under warranty that I'll send back and one on my defender that isn't under warranty that I'll try to overhaul. Both give exactly the same symptoms. Before I put a replacement or overhauled alternator on my defender... is my wiring detailed above...

It's still under warranty. If the consensus is that the alternator is goosed I'd rather just send it back for a replacement than start taking it apart and voiding the warranty. If my wiring is wrong or it may not be the alternator I'd rather investigate that before send the alternator back.

Current situation - No oil or battery lights at any time. Battery charges up to 12.4 - 12.5v when no load. Lights on and it drops to 12v pretty quickly. I found that there was no continuity between battery neg post and the transfer case earth. Stripped, cleaned smeared with vasaline now all...

T wash

Mines painted with Buzzweld. So far so good. It isn't quite black. I don't mind that. It's hard as nails.

Thanks for the quick reply Rougharse Racing. Would I be right in assuming that the instrument panel earths straight to the bulkhead? Scrub that question. Just done a bit of research on earth issues in defenders and it's not as simple as that. I'll have a look and see what I find. Cheers

At start up my oil light behaves exactly like it should. On at pos 2 and off the split second the engine starts. Doesn't come on or flicker whilst driving. Turn the ignition off, walking away, turn round and the oil light is on. It stays on until I start her up again. I've searched the...

First 5 results from a google search of the part number. You're welcome. https://www.lrdirect.com/RTC6283-Side-Panel-Rear-90Rh/ https://www.johncraddockltd.co.uk/rtc6283-rear-side-wing-landrover-90-rh-to-wa159806.html https://www.jgs4x4.co.uk/defender-rear-right-hand-side-body-side-panel/...

RTC6283 is what I think that you are looking for. Google away, lots of choice.

It's normal for the pipe to go to the EGR modulator and for the pipe from the modulator that would have gone to the EGR valve to be blanked off. That is what I would do but to be honest I'm not sure of the pros and cons of either method.

The pipe from the T-Piece goes to the bottom of the EGR modulator valve on the bulkhead.

This community is fantastic. Thank you to all for your advice. Don't worry, I will be asking very many questions that, if it were not for the fact that there is no such thing, would be stupid ones. I'm much more confident in what I need to do than I was earlier today. Thank you all. Yes...

Same place. 12 months of green laning, a winter of salty roads and driving round the fields of the leeds festive trying to find my stepdaughter (I've never known mud like it) have all taken their toll since then. There was no advisory for rust last year but I guess it's my job to keep an eye...

Thanks Landyfox. I've looked at that welder, thanks for the recommendation it looks just the job. how long do the gas canisters last?

Ha, I'll stick with the flowers. My old man is daft enough without filling him full of malt..... I was pretty up front with what it is going to mean. I negotiated the side of the house for working (it's plenty big enough) and the back patio for storage. She said that she supposes that it is...