Search results

I have just got a brownchurch roofrack for my 5 Dr freelander1 the main body is very good but the legs need some work

Bad earth strap as said above take off and clean up leads

Good idea thank you

Facelift 06 fr1 trying to remove my hazard switch to change the led ( not working) have taken out the cup holder to get to the back of the switch but the support strut is in the way. and I can't push it out is this the way to remove it. Thanks

Good day

Hello and welcome

My fr1 is the same -4.5 this morning light comes on for 3 seconds starts on the second crank of the key lots of smoke but after 6 seconds it's all good

Bell do a drive in service for most things

I read somewhere it was 1.5

Now got some from Bell engineering

Thank you all. the first bearing from barrette the bearings where all rusty so much for land rover quality

3 months ago had 2 vcu bearings from barrette (land rover) 2month later 1 starts rumblings as under guarantee replace new one and the one that came off was rushy at just 2 months old. Now 300 miles later its making a rumblings again . Both times its the back one that goes. Any ideas about this

1.5 meter alloy tube and 4.5 kilos. After 9 tests it was 17 seconds .with not much difference from the first to the last one Bit cold at 5 degrees.

I've had both and they are both good in one way or another sorry not much help to you

Just to add to this post dose the hazard switch flash with the indicators when switched on as mine is as dark as the devil all the time

My wife's polo dose that too, the garage did a wrong reset. It can be reset propaly

330 posted and diy bell for me too

for 3 years my vcu was round the wrong way (garage put new bearing on as was a bit of a rumba when it was up for sale) makes no diffidence still work

hi i did squeeze the socket but will give another go thanks