Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Zorro587

    Noise under acceleration and workshop manual question

    Nodge68, thanks for that. I'll have to get under and around and see if anything shouts out. I'll have a butchers for the other manual 👍
  2. Zorro587

    Noise under acceleration and workshop manual question

    Good morning all. My first foray into the world of all things Freelander 2 following a baptism of fire as the owner of a P38. It all ended in tears :) I've now got a 2009 GS diesel. Happy(er) days! My questions of the day however are thus: I have a noise happening when I drive and the revs...
  3. Zorro587

    For Sale Thule 751 Feet

    Hi, sadly, due to the unfortunate demise of my P38 at the tender age of 23, I've had to get a new vehicle. So, I have for sale a set of 4 Thule lockable feet that will fit Thule roof bars. There are 2 keys, but you'll need to supply your own bars. I'm after £40 (collected) or I'll post them...
  4. Zorro587

    P38A So long, farewell...

    ..auf wiedersehen, goodbye. Sadly the time has come where the end of my tether has been reached and I've switched allegiances. I would like to extend my thanks to all of you for your help, and perhaps more importantly your wit, over the last few years. Unfortunately my bank balance has failed...
  5. Zorro587

    P38A Jubilee clips or....

    ..the spring steel, grip with pliers, guaranteed to slip and smack a thumb nail originals. Your thoughts please.
  6. Zorro587

    P38A Brake bleed, vacuum type pump

    Thanks both. Don't know what my dad thinks he's doing this morning, but he's wrong :D:D
  7. Zorro587

    P38A Brake bleed, vacuum type pump

    Hi all, can the brakes be bled (a la RAVE description/method) using one of those vacuum pump type bleed kits - where you apply a vacuum direct to the bleed point - or does it have to be a pedal-pumped operation?
  8. Zorro587

    P38A 'O' Rings tip and thanks..

    Evening all, firstly, a big thanks to Druim for his pictorial 'How To' on changing the heater 'O' rings. Did mine with an ever so slight deviation. Secondly, my tip: remove the screw and swap it for one about 5mm or so longer (25mm-ish). I spent an inordinate amount of time getting the hoses...
  9. Zorro587

    P38A Immobiliser gone all fussy

    Hi all, my 1996 4.0 has suddenly got all immobilser fussy. I used to be able to open the car and start the engine no matter how much time had elapsed since the immobiliser was operated. Now it seems that any longer than the time to think "I wonder if it will start" and I have to re-zap (not...
  10. Zorro587

    P38A Advice please....knowledge maybe......

    The only dipstick issue is the one asking for the advice :-) The screw's on the rocker cover
  11. Zorro587

    P38A Advice please....knowledge maybe......

    Thanks both. I guessed the former answer, and as far as I can see the heads are....er...the same.
  12. Zorro587

    P38A Advice please....knowledge maybe......

    Good evening all. To keep this short I've had to have the heads checked on my 4.0. It's the 2nd time they've been off in 18 months or so but all's well there. They were skimmed last time but only pressure tested this time. However...using my usual bull-in-a-china-shop time management regime...
  13. Zorro587

    Lpg advice lol

    Water flow to reducer. If Tee'd off heater pipes and the Tees are too far from the reducer it can ice up due to the high-to-low gas pressure. My reducer is about 30 inches from where they were Tee'd off the heater pipes. No real flow so the LPG only played nicely after the engine bay had...
  14. Zorro587

    P38A Electrickery drain,where am I going wrong?

    Manual? Wot...like a book? :D
  15. Zorro587

    P38A Electrickery drain,where am I going wrong?

    Just as an aside (I too use the 2nd fob for the rf receiver) but have you checked that the LED at the side of the gear selector has completely extinguished (BECM gone to sleep)? Nice and easy on these dark nights...
  16. Zorro587

    It's A Gas...

    MIne beeps and cuts out if it isn't warm enough (I believe I read somewhere it can ice itself up if not hot enough). I've to re-route the water flow to the reducer. The T-offs would be fine if they were almost next to the reducer but its almost 3ft away, a 6ft round trip. Have ordered elbows...
  17. Zorro587

    P38A ABS 'fault' when reverse selected

    Hi, no work done on the vehicle. The prob has been around for a while but is only a nuisance as it clears everytime I restart
  18. Zorro587

    P38A ABS 'fault' when reverse selected

    Hi All, I've got a strange 'fault' that crops up from time to time. Ordinarily, selecting reverse causes no issues, but occasionally when I go from drive to reverse I get an audible warning and the dash displays "ABS FAULT". When I restart the car the 'fault' has disappeared. Any ideas what I...
  19. Zorro587

    P38A Tailgate decals

    Hi all, my 1996 4.0SE made me see a ghost the other night. I've only ever known it as a "4.0SE" through paperwork, but the other night, at a certain angle and at a certain distance, I saw the ghost of "4.0SE" on the lower tailgate to the right of the reg plate. If I was to replace these to...
  20. Zorro587

    Looking at buying this ex-SAS Range Rover...

    Can't they afford sheaths then? :D
Back
Top