Search results

Cheers Wammers will check this out when I get home. There was no air in the clear line between the filter and pump but will check properly later.

Looks like they have had a slight rise see what you mean by silly money! Have to see how good their customer service is now.

Got it at 30% off came in at 500 quid. Cheapest I found anywhere.

Think it's the fuel pump, chains and cam seem fine, bit peed off really the pump is a bosch recon unit from euro car parts three months ago!

Not been able to get at it yet but if I look through the oil filler cap opening the cam is spinning when cranked? Praying it's not chain failiure!

Driving home in my 2000 p38 diesel at about 60mph when the power vanished and it sounded a bit rattly, ran fine up to this point. pulled in and when I try to crank it there is no attempt to start and it is spinning faster than normal and doesn't sound quite right. towed it off the motorway to a...

Thermo switch is good so not that.

Just read you eas post, will check for continuity and go from there.

Cheers Wammers will do, would the pump run on command if the thermal switch had failed?

Hi All, I'm having a bit of an issue with my EAS pump. basically it is not running when I start the car or drive it. If I connect the free version of the eas software I can run the pump and it raises the car, the pump is a little lazy but does run. no errors are showing other than the usuall...

Your local trading standards office will be able to help you gain resolution from the garage.

Not fluid seeping out of the auto box cooler pipes is it?

Don't knock it till you've tried it lads ;);):oops:

Cheers Wammers, I will try and mist it up and find out...... the windscreen was one of the only things working properly on my Rangie!

As per the title, I was crossing the Severn bridge today on an errand when a stone or similar hit the windscreen slap bang in the middle, it has left a nasty chip 'bout the size of a 5p, if I have the chip repaired will it leave that section of the heated windscreen inoperable?

Try that in the morning, thanks for the tip.

got them working, cleaned the connections at the becm end, the floor is wet under the carpet, guess I am looking at time to replace the o rings on the heater matrix?

Cheers for the fast replys guys.

Morning guys, 2000 2.5 DSE. My number plate lights have both stopped working simultaneously, Tried swapping for new bulbs but nothing. In work at the minute so got no tools other than a screwdriver! Does anyone know which fuse they run off so I can at least check that for now.

Guessing neither, if the bolts were loose the timing of the fuel pump needs to be checked to at least confirm it is correct.