Search results

When I took it out and put the multimeter on it the resistance goes up and down when the float is moved so I believe it ok

Hello everybody it been a while, I've got a 1989 90 with a fuel gauge which has a mind of its own. It fine when it full of fuel but when it get a bit empty the gauge goes full to empty when turn or braking. Is this common and if so is there a fix, the sender unit is working fine. Looking...

Happy days. Thanks for that, part is now ordered.

Hi all, I would like some help please with the part number for a boost diaphram on a 1989 2.5td (19j) fuel injector pump. I've checked some of the treads on the 19j engine forum you have and done word searches in your search box to no help. I've also looked on Google but can turn up nothing of...

I got a reprint off eBay. Which was cheap

So is that why the exhaust valve are worn then?

It only cost me so £850 so far

No I want to keep it the way it is. So I'm on with doing a full recon.

Just an update 4 cracked Pistons 1with a minute hole in it. Then more looking, cracked hot plugs in head all 4 of them. Worn exhaust valve guides. Then more dropped sump and the crank bears are all worn so I stripped it of every last nut and bolt and found the cam was buggered, measured the bore...

Yeah I'm thinking something like that to. But I'm thinking piston ring, and I was just pleased with it the other day as it just clocked over to 100000 miles lol ��

It's a 1989 2.5 TD

Hi This evening when coming home the landy lost power and speed when I was travelling down the motorway. So I pulled over popped the bonnet and oil was being forced up through the dip stick when the engine is rev. Have any of you any idea what this could be. I have an idea what it is but just...

I would like some help with buying a tap & die. Do I need a metric set or imperial set.

Now then Can anyone of you tell me the size bolt I need to put in the front halt shaft to measure the end play please as I can't find the size. And also the tap I need to re thread the hub shaft bolt holes. Cheers

Cheers I'll go look at that now.

Have any idea where I could find them. I've just download parts catalog and I can't find any on that. And by any chance do you know somewhere I could find out how it should be done to repair the problem Cheers

Hi, I've just been getting ready to put new door hinges on truck and I have found a hole just above the lower door hinge, so I've cleaned it up with wire brush and it's developed into a biggers hole (not happy). So I investigated a bit more and the top of the post is shot too, can anything be...

Ok I'll look into it then and see how much it's all going to cost. Might as well do the full corner when it's off and in bit. Cheers

Hi all, I've got what I think is a lot of oil at the back of the swivels on the front axle is this pretty normal and if not how hard is it to sort. And what will it take to sort it apart from new seals as the balls look in good nick. Thanks

Cheers