Search results

the Disco bumper is for a D1 or a D2 ? thanks

thanks for the info, i manage to found a pair of wide ones to fit ;)

hi guys i recently broke the right cv joint on my 110 (1984) with a lot of damage (swivel, stub axle and hub are all dead) i have a spare front axle from a '89 discovery can i swap it in the def easily ? i think i have to keep the brake rotor and caliper from the def, but is their any other...

hello :) does anybody know the thread size of the water sender for a 200tdi ? the pn of the sender is PRC8001 thanks ;)

i got the same wire, same colour, connected to the sender. my sender is plugged on thermostat housing (2.25d then 200tdi, same location) maybe it's different on your landy :confused:

the first one (green/blue single) is connected to the water temp sender

hey :) i'm looking for a good right wing (driver side) blue or green, i will paint it red :p no need for the wheel arche or the lights thanks

i was asking myself the same question some times ago, and i have not find the answer, but clearly the identification number definitely won't start a 000000 for the first 110 in 1983. on this link : www.landstory.net , between 1983 and 1990, the 90, 110 and 127 production is estimated at 175000...

63mm ... if i remenber well, that's the outer diameter of the 200tdi inlet turbo didn't read the seconde page before posting - oups

hey ! some updates : motor off, i can engage every gears motor running, i can only engage 4th & 5th gears (not as smooth as it should be, but i can !) if i start the motor while a gear is engaged (included the first 3) with the clutch pedal down, no problem, i can even move forward if...

after some research other the web, it could be the clutch plate and the flywheel stick together by some rust. i try to start the motor only 1 month after assembling the clutch. tomorrow i'll try to start with my foot on the clutch pedal, the other on the brakes with the 4th gear engaged. i read...

hello :) i have just finished converting my '84 110 from a 2.25d to a 200tdi from a '91 disco. i have some clutch issue what i have in place : new master cylinder new slave cylinder new flex hose bleeding ok 200tdi engine with : 2.25d flywheel housing (to bolt on the original lt77) 200tdi...

Hello everyone ! 2 years ago i bought a '84 Land Rover 110 and i'm browsing Landyzone since there in submarine :D i decided that maybe i would introduce myself to the forum and start talking about cubes with you ! so here i am ! i'm from France, 80kms south of Lyon, i'm 35, and i got several...