Search results

Some interesting points there hd3 thanks. It definitely is not fitted with a fuel burning heater, but I'm not sure about the PTC. I've never noticed a click or rise in rpm whilst turning the heater dial. I'll take a look in the fusebox later and see if the solenoid is there, if it is and it...

saxavordian Thanks for your suggestions. In reply................ 1. Can you hear the fuel pump working before starting the engine. Yes, pump is working fine (or sounds like it is!) 2. Do you have any leaks along the fuel line. No leaks what so ever. 3. If leaks on the ground you more than...

Just wondered if anyone has experienced a strange starting issue such as I have at the moment? Completely and out of the blue it either will or won't start no matter how long it's been stood be it 2 minutes or overnight. The issue has come completely out of the blue in the last 24 hours...

Anyone out there got an offside bumper light for the facelift? Just returned to the vehicle and discovered that some tw@t has reversed into me and fooked off. Plenty on eBay I know but at anything between £40 and £60 a time. I'm hoping somebody has one about the place somewhere that may be a...

It wouldn't stop me if I was planning to. The back of the vehicle would be ripped off before it gave way !!! ;)

That being the case, you missed it 'cus that just about sums it up!! Except in my case there's no tow bar to start with so no electrics !!!

Can't express how delighted the wife was this afternoon when a receiver hitch and lift kit arrived for the old Freelander. This was only 24 hours after I advised on a thrifty Christmas after an expensive year. I assume claiming "It's ok love it was only 50 quid for the lot, and I paid for it 6...

It gets worse? The same welds over and over and over again. It ****ed me off just looking at it..................

If I put a bid in could you quote me on a 1000mm lift kit and extended pedal rods? The tyres were ok but I always thought there was a problem with the IRD. It only ever worked in rear wheel drive no matter what. Can only imagine in hindsight that it had a dodgy VCU and someone had removed...

Got given this picture today of my good self back in 1968. No VCU issues with this one............... :cool:

Could also do with a "HOW TO: Get hold of a set of Face Lift lightguards" !!! Where did you get them ?!?!?!?

Finally got round to fitting a DAB radio with patch lead for the steering wheel controls etc, and cut out the cubby hole to fit the CB. Very happy with the results. And then had an unforgettable blonde moment........ :crazy...

Well finally got around to changing the radio and fitting a CB today. Haven't removed the centre console before but it's as easy as it gets. Was a bit shocked to see what gubbins follow the gear lever knob off when you pull it out (on an auto) but there you go. Anyway, as I refitted...

Bit difficult to work out what's going where on the photo. However, as I recall it's straight forward enough. From the original wiring: Purple is the positive feed Purple/White is negative feed 1 (controlled by the CCU) Black is negative feed 2 (controlled by the light switch) To...

How's the main earth at the battery, body and engine points?

Remove the trim from around the lens, remove the three screws and you're done !!

I know how we could do it, an Iphone / Android app that switches on set of bluetooth controlled free wheeling hubs on the rear. The Android version could also offer a free download of U2's new album. I think I'm on to something here.............

:doh: Well that certainly brightened my day :hysterically_laughi Which actual kit was it? I don't want one, just curious.......

I deem this acceptable and have formally withdrawn my letter of complaint........

I don't know the particular brand of the spacers as I bought them secondhand off another user on here (Garboy88), I'm sure he could tell you. Alternatively other members will most likely be able to identify them from the picture. Modifications wise there was nothing to do simply bolt them...