Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. G

    Voltage to and from TPS sensor

    An update, problem solved. Some numpty who owned the vehicle before me must have been doing some work and when they re coneccted everything they switched the cam position sensor connection with the TPS connector and visa versa. When I checked the voltages in rave for the 2 sensors, and then...
  2. G

    Random but very important question

    Like the last 2 posts I have managed to grip the shocker shaft with mole grips at the top to get the nut moving. Then compress the spring and you should then be able to remove the securing nut. Watch the sping isnt handed, I have a Volvo V40 that broke a spring, and I didnt notice that it was...
  3. G

    Voltage to and from TPS sensor

    Yes thought it should be. I was looking at putting a variable voltage regulator into the circuit on the input side if I cant find the reason why it is giving the wrong level.
  4. G

    Voltage to and from TPS sensor

    Hi I am still having problems with the TPS sensor on my 1.8 Freelander. When I read the error I now get P0122 error code which will not clear. I have used a multi meter to measure the 3 wires connected to the sensor. The bottom wire reads 0. This is the Earth. The top wire from the ECU reads...
  5. G

    Help reqd TPS sensor issues

    I am having problems with my TPS sensor on a Freelander 1 1.8 petrol 2002/2003. The issue is I did an OBD scan using a cheap scanner a couple of weeks ago, it showed P0120 TPS sensor error. I purchased a sensor, admittedly cheap one from ebay £14.50. It looked the same as the one already on...
  6. G

    Freelander diagnostics

    Ive just order a Delphi product, have used a number of OB2 scanners in the past, but mostly they have either been for a particular make, or ECU or Air bag only. I looked at the reader the OP mentioned, but decided its claims were a little too goo, so after researching more decided the non...
  7. G

    TC and HDC Failure lights on

    Yep Wheel sensors will effect the ABS. I have a brake pipe to change to the near side front at some stage so may try a working used ABS pump just in case a shuttle valve used in TC and HDC side is sticking. One other thing I have noticed is the handbrake only comes up 1 click before the hand...
  8. G

    Hello Again

    Just saying Hi again, I have had to change my log in name, as for some reason my previous one wouldnt let me post to the forum. I did have a brief break from the forum, following my Range Rover being written off. Over the years I have owned a Series 2 a Series 3 a Defender a Freelander TD4 a...
  9. G

    Timing chain snapped

    If the rest of the car and body is on good nick, then pick up another engine on ebay, there are a few TD4's for sale.
  10. G

    TC and HDC Failure lights on

    I know there are plenty of threads (3 Amigos) on this issue, however I have only the 2 lights on no ABS warnings. The ABS is working fine been testing it on grass. I have changed the brake pedal brake switch and loom modification, with no change lights still on. Brake lights are working fine. I...
  11. G

    3 Amigo brake light switch replacement Guide

    Update when I plug into the OBD2 socket there is error P0120 this relates to the TPS sensor. The revs are varying on tick over so could this be the cause of the TC HDC fault.
  12. G

    3 Amigo brake light switch replacement Guide

    I have just replaced mine on an 03 Freelander. It is next to the brake pedal high up under the dash. You need the lay on your back and look between the brake pedal and clutch pedal, or on the left hand side of the brake pedal. Unfortunatley on mine replacing the switch did not cure the problem...
Back
Top