Search results

Landy lovers, can i instal a cabin handles on pillar A in the cabin? Is so...little instructions and shearing best practices will help a lot. Thanks Zoran

Hey Tonksey Your disco may not have cdl link on the shifter but the teansfer case may be equipet with one. Google cdl shifter for d2 and you will see how the spigot looks like. Go under you baby and check do you have one. If you do, just buy the new link version on ebay or so...and instal...

Wow, Thanks for this my friend. I've never thought that two different problems occur same time and cause me misunderstanding. I thought that the SVS is the guru for all the problems and that's what I've learned from other LR owners. So, lets tide up the belt and lets go to work. I will listen...

Gents, I know this is and old post, but I didn't want to open a new thread for and issue that is already existing. As I mentioned before, 3amigos are still on. Went to one Land Rover service, on reader shows rear ABS Sensor (sort it out, put brand new one) - Problem still exist Went to another...

I also think so, because when the heater indicator stays longer on the dash...im having this issue. In summer period i dont have thia issue, but then the weather is so fricking hot. About the diesel standards...they say its up to -20 degrees. It's very strange, when hot i dont have this issue...

Hey friend, just tru al the advices :( no luck. I assume i have some air in the piping system because when I purged the pump sound didn't stop at the end....buzzing all the time noice. :( I guess the air comes inside somehow. It's also strange because I don't have this issue in the...

Hi Mark, you got the "good luck" quote perfect :) thanks ! sorry for writing you so late but I was busy. This morning at -7 degrees temperature i warm the heaters once, turn off egnition, warn them again and it started better than usual. You are right, could be the heaters. Now, plan when to...

Hy Mark, sorry for causing you misunderstanding. The engine starts perfect after 3rd attempt. The iddle is perfect then, the revs slowly goes down as the temp rises and stays come( the engine is not shuting down). All the rest of the atemps, the engine starts from first time. As a matter of...

Hey Mark, Who knows when :) when I bought my landy i didnt hear that info :) How you connect that with not cranking...??? Could you please be so kind and explain to me! Zoki about Hey

Hey gents, Recently i noticed that when i leave my td5 not working couple of days on the cold, it's struggling to start at first attempt. Changed the battery with brand new. Still having issue. When cranking the engine after 3rd time attempt and pressing the pedal, smoke comes out and engine...

Hi Friend, I read your previous post... but I couldn't quote understand it. Sorry I just like to mention that When I start the engine...I can hear the ABS module doing the test (ggrrrrr) and even with the 3 amigos on...my TC still works fine. About that test of the SVS....can you please...

Hi all, Just quick update on the problem I had. I've replaced the ABS sensor with brand new one. Again the problem exists. I start up the engine, drive for a while...and there it is...ting ting ting...three amigos are ON. Park the car, turn off engine, turn on engine and the light are off...

Wow, you realy did it like a pro. i can't thank you enough for the effort you did to explain it in this way :) The drawing is super fine, but I couldn't fine the info for the central hole in the front ones!? About the toast...hhhhmmm, you just made me hungry :) pass on some...I don't...

Hi Gents, Just to inform you, I've became a proud owner of D2 td5 For now things are going well, some issue with abs sensor, but no big deal. Thank to all who give me their advices, it helped me a lot in my selection Hope this topic will make somebody else a proud owner of D2 Cheers Zoki

Hey friend, I'm Very thankful for all your time spent helping me sort this out. If I can be of any help to you, please let me know Stay in touch Zoki

Hey M8, Thanks for the respond, Yes, I Have coils all over. I will appreciate if somebody can share the exact dimensions of the homemade lifters (front and back). I can see that there are a lot of different types of spacers, and that way I addressed to this forum :D, because I now...

Hi There, Did somebody installed a home made 2" Lift Kit on a Disco 2? How should that look like, was it installed on the springs? If somebody had made this kit's I will appreciate if you share the dimensions from them. I like to lift mine, but currently my budget is running low...

Hi my Friend, I agree with your opinion. If I only change the Sensor, would that be ok? My local dealer will supply me with a new on from Bearmarch. I'm also wondering how the locking and unlocking the doors helps the amigos to disappear. Like I mentioned...if the lights appear while...

Hi M8, Where exactly is located the BCU? Can I touch it with bare hand? Any picture? Zoran

Hi Gents, I just become a new proud owner of a Disco 2 TD5. Before that I had a Freelander 2.0DI and i'm familiar with some issues. When I bought it the 3 Amigos were on my dash. Went to the mechanist, connect to OBD, info showed on the rear right ABS sensor. The Mech. Erase the error...