Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. LandyMan

    Freelander 1 TD4 won't start :( ..Anyone local to leicester with a Hawkeye? or other freelander diagnostics tool?

    thanks, found 1 on ebay for just over £8, i'll give it a whirl and see what happens
  2. LandyMan

    Freelander 1 TD4 won't start :( ..Anyone local to leicester with a Hawkeye? or other freelander diagnostics tool?

    doesn't start with easy start.... changed crank shaft sensor, still no joy. possible causes: Fuel pump(s) Fuel pressure regulator Glow plugs (don;t think it's these) Injectors (I hope not) Maybe even the alarm, does seem to be immobolised
  3. LandyMan

    Freelander 1 TD4 won't start :( ..Anyone local to leicester with a Hawkeye? or other freelander diagnostics tool?

    Thanks .... it's a 2002 td4. I took the fuel line off the fuel rail and cranked it, fuel came out the pipe. I will check the fuel pumps, 1 behind rear wheel arch, where's the other 1? Also, if there's low fuel pressure, wouldn't that come up as a fault code?
  4. LandyMan

    knock or thud on rear end

    sounds like the infamous rear diff bushes
  5. LandyMan

    Freelander 1 TD4 won't start :( ..Anyone local to leicester with a Hawkeye? or other freelander diagnostics tool?

    I have a nanocom for my d2, i just spoke to blackbox solutions and they have told me that the nanocom can;t communicate with the freelander 1. this is very disappointing! The nancom is an amazing piece of kit, but it doesn;t work with the freelander 1, for roughly the same price I could of...
  6. LandyMan

    Freelander 1 TD4 won't start :( ..Anyone local to leicester with a Hawkeye? or other freelander diagnostics tool?

    It won't start, aa came out & tried to get it going, said his diagnostics was unable to communicate with my car, would like to get a non aa opinion
  7. LandyMan

    Freelander 1 TD4 won't start :( ..Anyone local to leicester with a Hawkeye? or other freelander diagnostics tool?

    Hi, Is there anyone in Leicester or local to Leicester with a hawkeye (or any diagnostics tool for a freelander 1 td4) that would come round to my house and plug it into my freelander please? Thank you
  8. LandyMan

    It's been a while

    yeh just a bit!! how are you? you've got a D3 now?
  9. LandyMan

    It's been a while

    been busy with the new house, working on the d2 and the freelander. The freelander won't start at the mo, not sure what the problem is but haven;t really had time to investigate it. The D2 is still going strong, need to replace the headliner and fix the leaky sunroofs, and put my lift kit on...
  10. LandyMan

    It's been a while

    How is everyone?
  11. LandyMan

    Can copper slip be used on brake unions?

    You should do! you'll make a small fortune lol
  12. LandyMan

    Can copper slip be used on brake unions?

    Oil???? why the hell did I write that???? hahaha ... guess it's been a long week!
  13. LandyMan

    Can copper slip be used on brake unions?

    I know that feeling, went to change my brake pads the other week, ended up replacing both front calipers, carriers, and flushing the whole system with new oil lol
  14. LandyMan

    Disco 2 Shiney New Brake Calipers and Carriers

    Yes cus then I will have a spare set of calipers if they need replacing again. I could probably sell them on too. yeh, very expensive for the original lucas calipers
  15. LandyMan

    Disco 2 Modding my D2

    Replaced my front brake calipers and carriers at the weekend, here is the thread https://www.landyzone.co.uk/land-rover/shiney-new-brake-calipers-and-carriers.298730/ Here's a picture
  16. LandyMan

    Disco 2 Shiney New Brake Calipers and Carriers

    So, at the weekend I replaced my brake calipers and carriers. I had a very seized slider in the front drivers side carrier, which was making the 3 amigos appear when applying heavy braking! After reading lots of threads about what calipers to get, I went with Britpart. I try not to buy...
  17. LandyMan

    Please help

    haha, yeh tried that, maybe ... if I can get the carrier of I might be able to shove it in a vice ... or my press
  18. LandyMan

    Please help

    no 1 adjustment tool? I have found these locking nuts http://www.lrparts.net/locking-wheel-nut-code-c-for-discovery-2-and-range-rover-p38.html and http://www.lrparts.net/locking-wheel-nut-code-c-for-discovery-1-and-defender.html £10 price diffference, not sure if I should just spend the...
  19. LandyMan

    Please help

    how did you do that? mine is rock solid! Also, does anyone know if disco 1 or defender wheel nut is the same as a disco 2 nut?
Back
Top