Search results

Had the car back from the garage and the problem was a faulty injector harness, I'd replaced this only a month ago it was oem quality no original. Replaced with genuine landrover then while doing it got them to change copper washers and sesls on injectors. Now all working fine. Glad...

I had the same problem and I changed harness and it was fine, 2 weeks later happened again, harness was faulty on one injector. Changed for genuine harness and had all the copper washer and seals changed at same time. Now running fine I'm told picking it up Friday

Update to post landy was taken on a recovery truck and taken to a garage. wouldnt start and hadnt got a glue what else to do. it turns out injector 2 and 3 were firing sometimes and not others. After putting in two test injectors it was still the same. wires all traced back to ecu and i...

Thanks fellas ill give them all a ring tmrw :) lee

Hi all Might have a problem with two of my injectors where's the best place to get new injectors from and does anyone no a place I can send to get them refurbed without getting ripped off. Lee

cant remember what make but it was about £17 with a trade card at halfords

Bleed valve doesnt work on mine. I run the engine so it was warm then took off the correct pipe and there was no bleed valve in my current unit. Anyway put the valve in and it started then run out of fuel and stopped. Tryed this a few times i looked and looked on the internet and as...

I fitted a new fuel filter 2 months ago. I've had the fuel pump out today and it's making the standard noise and you can hear it pumping, also no black sludge in the unit. What could cause the fuel filter to clog up this fast? Thanks for response

Got it started First of all cleaned fuel pump this is working Been trying all day Took head off again replaced no joy still not starting Nearly gave up then took head of and checked resistance of the injectors, just thought a difference between them might show. No such joy all around...

Thanks cant get the engine to start now? in turns over cranks then starts in a fashion then stops is this fuel is the ecu telling it to stop the fuel?

So took the rocker cover off this morning just to make sure all the injectors were connected correctly. Couldn't see a problem so put back together. Did the start up think 5 presses of the pedal. Let it run through then tryed to start. Nothing tried again nothing. Checked everything under...

Dont think ill be cutting the carpet seirra :-) Ill be doing this tmrw :-( oh this car lol Cumbria what pump did you buy was it a genuine oem or oem quality pump you replaced with. theres not a bad difference from £70 through till £250

Would the fuel pump cause it to run on four cylinders its running quite rough at present, my neighbour came out and he worked as a mechanic previous and said it sounded like it was running on four. How easy is the fuel pump to get too? I was going to take the rocker cover off tmrw and...

I cant get my head around why for one why i havent got a air bleed valve on my fuel filter. and two i brought one and when fitted the engine runs out of fuel? could this have something to do with the injector washers? You will have to bear with me would this have a effect because not...

no havent replaced the fuel pump replaced wastegate solenoid harness plug on ecu is now clean and cleaned over the last two weeks reguarly and no more oil. Car drove without fault to the garage and back Ok so dont really no what my next move is the fella and the garage said it...

yeah thats the one i connected it too i even took the other side off to check. Anyway i drove to a local garage and he has just connected it up. He was just leaving so just told me the codes these were : 18 Driver Demand 1 Fault 96 Road Speed Missing Fault Im trying to look up now...

Just tried ringing but everywhere seems closed at the moment. Ive now got it started and removed the bleed valve i forgot to say the disco hadnt got a bleed valve fitted and when i put one on it just cut out. Its running now but dont really trust it wheres the best place to post on here to...

Hi looking for a machine for Diagnostic willing to pay just wanna no what the problem is after changing a few parts. I live in fareham but if someone is close can travel, well thats if the car makes it lol Thanks in Advance

Right he we go again, Got home by bypassing the wastegate solenoid and drove 90 mile never went above 2500 revs but it was still pulling up hills. Did this just to be on the safe side, anyway this morning changed the solenoid valve and went for a drive , when going downhill above 3000 revs it...

Ive just had a similar problem and it was my solenoid wastegate, if you want to do a check just bypass it and see if it runs fine, if it does then its the solenoid. Just a 2 minute job that will bypass the problem Lee