Search results

Oil light came on while driving (intermittent). Stopped and waited for cool. The level was low (just below low mark) so topped up at garage and drove home. Light still came on, but less. Topped up fully. Light still coming on. Light off at start of drive for maybe 30 minutes Then on...

So.... I installed some TF Big Bore shocks on my rear axle (One Ten 1985). With the shocks were the washers and bushes. The bottom (that went onto the axle) had two washers and two bushes. So I fitted them with the washer on top, then bush, then through the axle fitting, then 2nd bush, 2nd...

Had a new clutch installed after my clutch fork broke. All well and good. Drove it home and the gear lever now rests between 1st and 2nd, not 3rd and 4th like it normally did. Any ideas if this is something simple, or should I take it back? it's a 300tdi, with an R380

I have a brand new, un-fitted 110 Front pipe NTC1794, and a front silencer, NTC4614, both britpart. I bought the wrong pipes, so would like someone to use them, rather than just throw them. I'm in North Dorset, just north of Sturminster Newton

So I have an MOT to get through. My exhaust has rotten through just behind the mid box. So I order a new mid box. As I was fitting that, I found the front pipe had also rotten through at the elbow coming down off the turbo. So I've got a new one of those. The new pipe and the old pipe are...

Moved and found a little landrover place in Henstridge that does Defenders. Seems good, MOT coming up, anyone used this place before?

I wish I had the guts / time / money and space to take this on... https://www.ebay.co.uk/itm/254482650242 Would need a big muddy forest alpine hill as a back garden though.

I fitted a whole bunch of new parts from a disco to my defender recently, but the front axle was a RHD and my LHD axle couldn't help as the front axle was weirdly old and unique. To make the disco axle fit my LHD defender I either need... 1 - One of these for the 'wrong' side. i.e normally the...

Drove somewhere. Stopped for about 10 minutes, then went to drive off. Car cranked but the starter motor was stuck on. It is now on if I connect the battery, even with the key out. it's a 300tdi 1985. Nothing fancy between the battery and the motor. Just wondering what what I can do to get...

Steering had felt a tad soft yesterday. Today, driving at 40 - 50, hit a little hump. steering wheel goes crazy. Had to slow down to 5mph to stop the wobble. Then on the way home it happened 5 more times. Went under the car, got someone to move the wheel...

I have a bucket of bits. Most are of no use and some I've happily given away. But what the hell is this thing? I think it comes with some bolts, that I have in a bag, but no idea what it's for.

Has anyone seen these kinds of mounts before? Should they be mounted so that the strut sits 'on-top' of the cross member, or mounted so that they are sitting in front of it? There is enough wiggle room to convince me either way.

So close to finishing the huge list of jobs and get the car back on the road, and noticed some water dripping. On inspection, the radiator is leaking. The car is a 1985 One Ten, but with a 300tdi from a 94 disco. Do I get the BTP2275, which is upto TA or do I get the PCC500170 which is from...

At least that's what I think they are... brand new, never been fitted. Can't remember how I got hold of them, but either way they are of no use to me. In Dorset near blandford forum, if they are of any good to anyone let me know, hate to just throw things away.

Got the dash off for other jobs, was thinking of doing AS MUCH as possible so I only have to do this once. Any recommendations for sound deadening stuff?

Been waiting for the weather to clear - so now I'm going to start on the bulkhead repairs. There are a few spots of rust popping through, fingers crossed that I'm starting this in time. Going to order the replacement panels this week, then this weekend remove the wings, doors, etc. For anyone...

I'm fitting a roll cage to my 110 and while getting things in place, noticed a little problem. My rear cross member doesn't seem to have the holes all the way through where the roll cage bolts too. On this photo (on the left side) there are two holes almost on top of each other. One my...

I've finish my double cab to station wagon conversion and have one last little issue to figure out. When it was a double cab it had a canvas back, and there were holes drilled into the body to hold the canvas. It also had a roll cage frame bolted to it. I have another (now longer) roll cage...

Light guard kit - never been used or fitted. All parts there. £40 Located dorset - but could post.

Genuine Land Rover part. Never been fitted, PERFECT condition. location blandford forum, dorset £20