1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Chassis holes

Discussion in 'Defender 90 / 110 / 130' started by NiallRussell, Apr 23, 2019.

< Previous Thread | Next Thread >
  1. NiallRussell

    NiallRussell Well-Known Member

    Joined:
    Dec 23, 2013
    Posts:
    604
    Likes Received:
    131
    Location:
    Dorset, UK
    I'm fitting a roll cage to my 110 and while getting things in place, noticed a little problem.

    My rear cross member doesn't seem to have the holes all the way through where the roll cage bolts too.

    [​IMG]

    On this photo (on the left side) there are two holes almost on top of each other. One my chassis they are only on the outside edge of the cross member, not on the side under the car.

    There should be no issues to drilling them through right?
     
    Last edited: Apr 23, 2019
  2. NiallRussell

    NiallRussell Well-Known Member

    Joined:
    Dec 23, 2013
    Posts:
    604
    Likes Received:
    131
    Location:
    Dorset, UK
    I should add the car is 1985 build and as far as I know there have been no repairs to the chassis (that i've found at least) and it's still the original.
     
< Previous Thread | Next Thread >