Search results

Hi. I am in the process of fitting alternative front seats in my 110 TD5 CSW. The new seats are wider than the LR standard ones and this will cause the original retracting seat belts to rub on the rear corner of each seat. This is not ideal and I am not sure if it would fail an MOT like that. So...

I have had by 110 Defender TD5 csw now for six years, I know this is not an extended length of time but is that time I like others have had to purchase spare parts to keep it in good roadworthy condition. The things I did before making the decision to get a Defender was look on this for what...

Hi, I am trying to find the size of the gap between the end of the crankshaft sensor and the flywheel. I understand when the sensor is assembled the correct gap would be predetermined by manufacturing tolerances but I am just interested in knowing what that gap should be. I have measured fron...

OK pretty dim question but I think i have an issue with the engine loom on a Defender TD5. Its the wires that connect to the injectors and its from the plug and socket at the head back to the ECU. Some journeys I have poor running after a few miles If I stop and under the bonnet move the harness...

I am about to replace the rear safari door on a 2001 CSW and would like to reuse the heated window with high level stop light. My problem is how to remove it as it is glued in. Thinking a thin wire like a cheese cutter but not sure if it would be a viable solution. Any solutions ?

Hi some advice wanted please. I have a 2011 FL2 HSE, only had it 4 weeks so a mishap whilst removing the LR supplied dog guard I scratched the window film on the left side rearmost side window. Firstly didn't know it was a film applied to the windows, thought it was the color of the glass but no...

Looking at a 2011 2.2 HSE auto with 38000 miles. What should I check? Is £15,000 way to much from main dealer with warranty?

Anyone use torque sticks. I am not sure the results will be consistent what are your findings?

Anyone use torque stick...

Had to change two front tyres which were damaged. The new tyres have 14mm of tread the rears have 8mm of tread will this size difference lead to transmission wind up?

As the title says has anyone fitted a rear crossmember from Brookwells the one I am looking at is KVB000290A110SEHD. It is advertised as HD a 50% increase in material thickness from 2mm to 3mm OK not earth shattering but it is an improvement on STD. What I am looking for is a crossmember that...

Thomas the Tank Rover (affectionately christened 'Mildred' by its creator, Frank Rothwell) has had its 2.25-litre petrol engine replaced with a custom-built steam engine. The vehicle is now fully coal-powered, makes all the required chuffing noises and is capable of 15mph. Rothwell, a...

Can I use the power of the Landyzone to find a NEW ECU for a TD5? OK my ECU has failed I have sourced a used replacement which is keeping me mobile but I do want a new replacement. I have tried a number of main and independent dealers for a new NNN500020 not found a dealer with one on the shelf...

I replaced the ECU (engine module) in April this year with a new genuine LR unit but yesterday it has failed, giving no warning at all. I was traveling at around 50 MPH when the engine just stopped running would not restart. I was recovered to home, the recovery mechanic thought the problem was...

I have currently some running issues with my defender 110 TD5, a local LR specialist has diagnosed ECU issues (current ECU is MSB000080) and suggested replacing it with a later one (NNN500020) which will have the ability to update the fuel map as and when required. I have found a new boxed ECU...

Has anyone used this company for a TD5 head weld in the injector pocket? if so how did it work out for you? http://www.ebay.co.uk/itm/LAND-ROVER-TD5-CYLINDER-HEAD-SPECIALIST-CRACK-REPAIR-/322445279286?fits=Car+Make%3ALand+Rover&hash=item4b133c8036:m:m--YkO4ywpJ7WUXNcmWJKvw

Hi, Has anyone had to replace their AAP sensor on an early TD5. The part number is MHK100600. Land Rover main dealer says no-longer available but pointed me towards a local independent dealer for MG Rover parts, using the same part number I obtained a new AAP sensor identical to the one removed...

Ok I am about to replace the wiring to my crankshaft sensor on a TD5 and while I am at it change the sensor (NSC 100790). I see that some TD5 vehicles have a sensor spacer (NSJ 000010) some have no spacer what determines the fitting of a spacer?

The insulation on the wiring to my crank shaft sensor is starting to degrade and crack. I have previously made a repair to the insulation which cured a misfire but now I am in a position where I have the time to change the wiring to the sensor completely. I have seen a repair kit on e-bay but it...

Hi, I it Ok to charge a battery whilst the battery is still connected to the vehicle. Defender TD5 110 CSW, 120A alternator Odyssey 115Ah battery 10A battery charger. The battery is new and currently not needing a charge but if it ever needs a charge I have a couple of Anderson plugs/sockets...