Search results

Hi. So I have finally got my gearbox in and the landy is up and running again! 😊 Problem is now I have unseized the linkage of the transfer box changing the drive from 2nd to 4th. But now it keeps falling out of 2wd and loosing drive. If I lean on the stick it stays in drive but...

Hi. As the title says my gearbox is making a horible noise as though a gear is just touching another gear. it does do it in other gears but mainly 4th.... So i have stripped the box..... all looks good..... The only thing i did find is the lay shaft bolt through the bell housing was unwound...

Hi. I am after some tires for my series 3. Where is the best place to get some? They can be second hand or remoulds...... just to get through mot.... :-) Thanks Dave.

Hi. Anyone got any advice on top steering column bearing replacement? Reading other posts all you do is pull the center part out then the outer.... is this right? Because I am struggling. ... :-) thanks dave

I am in the prosses of putting a different engine into my landy. It is the same as what came out its a 2.25 petrol lump. The quesyions I have are: Does anyone know where I can get the pins which holds the release bearing onto the fork? Mine never came with any so am in desperate need of two...

Hi. I have to replace the front chassis section where the bumper goes on. And the spring mount. I can repair whay I already have or I could replace. Means I will have to remove the spring mounting. The springs look Very tough. Are they a pain to get back into the mount once dropped? This will...

Hi. Took the engine out of my car today. Wow what a fight!! Nearly every single nut and bolt was either seriously tight all the way off or rounded nut head!! What a pain in the bum! I left the gearbox in and removed the front panel that holds thr bonet up. Also i had to grind the front...

Hi. I am thinking of ways to look after my chassis through the winter. At the mo there is underseal under there but its very old. Should I clean the old stuff off or leave it on there? Should I wax oil inside the chassis? Does it matter I cant clean it all out before hand? Is there any holes...

So. Bought a series 3 the other month and got it home, the bottom end was knocking. So I pulled the sump. Lots of metal.... pulled the big ends off. There not usable as its through to the copper. Got some new shells ready to fit. So tonight pulled the 2 main caps and the oil pump. Oil pump...

Hi. Hope you can help, I am going through my 1975 landy and have stumbled across a fair bit of rust behind the front lower dash panel. I haven't managed to remove the panel yet as it seems to be secured really well! But the rust is just falling out from underneath the panel. Has anyone had...

Hi. I have been reading posts on this forum for some time and finally got round to registering. I am new to land rovers. My wife recently won a 1975 series 3 '88 landy. Drove it home and to be honest was a bit of a shock! Loads of play in steering, no real brakes but when they work pull...