Search results

Just put my discovery 1 200tdi on eBay if anyone is interested...

Hi, I'm selling my D1 due to a new project I'm starting. I'm looking for £5000 and it is located in Leicester. Please see my eBay listing. Thanks. 1994 Land Rover Discovery 1 200tdi Auto grey offroader off roader roll cage...

Hi all, I've just got a 2004 discovery 2 TD5. I've got a D1 at the moment but I want to do some more long distance green laneing and maybe some expeditions as well as some pay and play. The D1 is too slow and unreliable hence why i have upgraded to the D2. The first jobs is to make it as...

Hi all. Just a quick one. I've got a disco 1 and going to upgrade to a disco 2. I'm planing on putting a custom made fuel tank in the boot so I can put a winch in place of the old tank. I'm making a sheet metal folder to help me make the tank. I need to know the distance between the inside of...

hello, any one fancy going green laning around leicestershire area (or peak district). i know most lanes around here.

I'm working on a 1991 defender 90 with the 2 front side lights not working. I've got no power at the 2 light do I've traced the wires back to the bulk head but can't see were they go after that. I've got lots of connectors at the bulk head. Are they anything to do with the lights. Any...

There's a green lane near me that has a bom hole in it. am I okay to repair the road or do I need someone permission. I'm thinking of putting loads of hard-core down there as I'm taking a load of plaster off the walls at my house at the moment

Selling for a freind Auto td4 in silver. It's in good condition inside and out. he brought it 6 months ago and had a tow bar fitted but only pulled a 750kg trailer. It's in Whestone, Leicester. Pm me with any questions and I will get back to you.

im trying to find a Alpine Window Sea for a disco 1 200tdi 1994. I've found one for a defender but don't know if it will fit. Also don't no if I have 4 or 5mm glass Any help will be appreciated

Hi I was in the Peak District when my auto gear box temp light came on. I diagnosed it as a faulty sensor as when the box was cold the light was still on and when I disconnect it the light went off. So it looks like I need a new one. Can any one tell me where I can get one please. Thanks

I've replace my brake servo and master cylinder with a secondhand one after brake fluid was leaking from the master cylinder into the servo now all the brakes are seizing on and the only way to push the piston back is to release pressure by opening the bleed nipple. I'm convinced it's...

Hi, Just got a used diff off eBay and it has a lot of end float 1.74mm. I checked my old one that I blew up and it hasn't got any end float. The new one is off a td5 and the old one is from a 300 tdi disco so don't know if there a different design and this is normal

Did a quick search on this but couldn't find anything. Blew up my rear diff today and was thinking if a diff from a newer landy will fit in my 200tdi 1994 disco.

hi, i have replaced all the seals on my pas box after it started leaking. it worked fine when i went on a test drive then the next time i used it it started leaking again. i replaced the steering column oil seal and dirt shield but the same thing happened again. i've just taken the box off to...

Hi im looking for a bit of advice on a weird starter motor problem. The motor has been sitting in my garage for about six months and the one on the car is knackered so I decided to rebuild the spare one. When I benchtest it it's got plenty of power and the solenoid kicks the gear out with a...

Has any one got a Discovery 200 tdi viscous fan Cowling for sale.

Hi I've just recently rebuilt my engine and now I have put a new oil pump on because the oil pressure was still too low when the engine was hot but I've just started it with a new pump with the engine obviously cold the pressure goes up to 70psi is this right or have I got a problem with my...

I'm building a roll cage at the mo and was thinking of making this front sticky up bit but I don't no what it's for. Is it to help protect the bonnet if you are upside down.

Hi trying to replace the crank seal on the front timing cover 300tdi, have removed the old seal (all rubber) order a new one off line and it's came as part metal part rubber. Spoke to a local land rover garage and they said you have to die grind part of the casing off to allow to new seal to...

Hi am working on my mates 300 TDI again. I'm trying to replace the bearing for the fan on the time in case. When I tried to pull the flange off the bearing it snapped in three places. Does anyone know where I can get a replacement Bearing and flange at a reasonable price