Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. richie1969

    Key fob

    Is it possible to programme a second remote for a disco 1 (the 2 button one) or does it need a laptop as can't remember I know you can with the pear shaped fob Thanks
  2. richie1969

    235 or 265/70/16

    Hi there im after some 235/265/70/16 MTs tyres for my disco 300 tdi located in west Midlands Also a steering guard and light bar Thanks
  3. richie1969

    petrol smell

    Hi everyone freelander 1.8K series every so often get a really strong smell of petrol from back of car and can last a few days then nothing for weeks. Checked all underneath and no signs of a fuel leak and all fuel lines dry and in good condition Has any one else had same kind of fault if so...
  4. richie1969

    Bits

    Hi all im after a few bits for my disco 1 300 tdi Some 265/70/16 MTs tyres x4 ideally insa trak remoulds (Dakar) Light bar not fussed if light are fitted Steering Guard 2" lift spacers and does any one no of any spot light brackets for a 300 tdi got a tubular bumper on it but no winch or does...
  5. richie1969

    Front wheel bearing..

    What are front wheel bearings like to do on a Freelander 1
  6. richie1969

    Head bolts

    Been told you can use the head bolts on a disco 300 tdi upto 5 times has anyone else heard this as supposed to be in the Haynes manual... But I'm not so sure.....
  7. richie1969

    Valve springs

    Any ideas what would cause another valve spring to break on my 300 tdi discovery this time it's a different cylinder. As can't understand why another has broken only reason I can think of is head I had that was supposed to be good has got bent valves.... Thanks for any advice or ideas in advance
  8. richie1969

    Broken valve spring

    Broke a valve spring on my 300 tdi discovery. Replaced broken valve spring and collet. All good and less than 70 miles later the same valve spring has broken again. What could the possible cause of it happening again on same cylinder. Could it be a bent valve that's caused. It to break again as...
  9. richie1969

    Head and gasket changed started still got white smoke

    Head gasket went on 300 tdi Replaced head due to crack between 3&4 rebuilt it all started and still got white smoke bellowing out exhaust Is it residue left from when gasket went or something else to deal with got to do oil and filter change yet thou.. And best way to bleed cooling system any...
  10. richie1969

    Freelander won't start everything working just nothing when go to crank .. Nowt

    1.8 Freelander won't start locks and unlocks like it should battery good all dash lights working you can hear fuel pump going but when you turn key to crank nothing happens as if immobilizer is still on Any ideas happened earlier in day and tried several times since and started all ok then...
  11. richie1969

    Horn

    Has anyone fitted a Rover 200 airbag steering wheel to a 300 tdi without a airbag if so how did you wire up the horn so it works of the horn buttons on the replacement steering wheelCheers any advise greatly received
  12. richie1969

    Tyres

    What's the biggest tyres I can fit on my disco 1 at the mo without a suspension lift Got some 235/85/16 on freestyle alloys with they be ok for road use till I get a suspension lift on it as prob realise they to big to fit if going off road with no lift... They off a 110 defender.. Any advise...
  13. richie1969

    broken RH engine mounting

    Hi there can you remove a broken RH engine mouting from a freelander 1.8 k series where its bolted to engine without removing the cambelt as 2 upper engine mount bolts have snapped due to poss previous onwer cross threading bolts when replacing cambelt thanks for any help or info i can get...
  14. richie1969

    Landrover Show Eastnor Castle

    Hi There everyone Whos going to Landrover Show at Eastnor Castle at end of the month
  15. richie1969

    vibration at 60mph through car

    hi there everyone ive got a vibration thru the car at 60 mph had wheels balanced and im suspecting it could be front prop out out balance does anyone else have any ideas what else it could be is it worth removing front prop and trying at 60 mph and does diff lock need tobe engaged to use it...
  16. richie1969

    wheels and tyres

    wanted bigger wheels and tyres and rear wiper motor for my p reg 300 tdi discovery with no body mods as yet :):cool:
  17. richie1969

    interior lights flashing

    :fencing:when un locking my disco with remotes interior light flash 6 times but also noticed that rear wiper not working.... looked and asked about this but to no avail.......:confused:
  18. richie1969

    new lad....

    hi all just bought my first disco at the ripe old age of 42 ...... new to all this even thou ive worked on landrover in the past.. so thought id bite the bullet and take the plunge after some pushing from my brother and gladi have and wish id done it years ago.... getting back in to my landys...
  19. richie1969

    wheels and tyres......egr

    whats the biggest tyres i can fit to my disco 300 tdi with freestyle alloys without having to modify the bodywork, plus does anyone no where or how much clear front indicator lenses for the above vehicle.... plus is there much gain by adding a egr blanking plate and what do you do with the...
  20. richie1969

    no clock working or chime and windows

    hi ive got a 300 tdi and the clock, revcounter, and chime plus now windows are working intermitantly any ideas...... as its driving me mad:welcome2::(
Back
Top