Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    Leaking CAV filter - Perkins 4203

    To all ye knowledgeable folk - Mounted to the bulkhead in front of drivers side is a CAV tank for the cold start on the perkins 4203......mine's leaking like mad when the engine is running and is actually impacting on the diesel I use. There are 3 outlets on this and a breather mesh on top...
  2. A

    correct size fanbelt - Perkins 4302

    Hi again all out there, As I've sad, just swapped a burnt Perk for a working one and so-far all going well. Only problem so far is that the belt seems waaaay to loose - I have the alternator as far over as I can get it on the arm ( it is currently nestled up against the engine mount ) and...
  3. A

    4WD Yellow knob won't release.

    Hi there, Have just changed over my engine - dead Perkins 4203 for less dead (working) 4203 was was out test driving. I decided to lock up front freewheel hubs to check 4WD and all is good. When I came to disengage 4WD, realized that there is no load on the spring, and it therefore will not...
  4. A

    Perkins 4203 - anyone getting rid of one ?

    My 4203 appears to be knackered somehow (although for the life of me no-one can tell me why ). Still turns over without noise. Cannot start and run whilst being towed. Will not fire with Easzi-start. Oil is fine on the dipstick as well as the filler cap, not milky. So I assume there is a...
  5. A

    transmission fluid leak.

    So my Series 3 109 had developed what appears to be a leaky transmission. It will start and run fine, but eventually heats up, and as it gets hotter, clatter of syncromesh increases ( either that or it is the valves ???), after which I seem to lose power to the accelerator, and it finally cuts...
  6. A

    What's this going to cost ????

    So the Perkins Diesel is dead and I have a feeling too costly to revive. From advice on the forum, to get more power, less noise, etc a 200tdi would be a good option in the 109 SIII. Is this relatively straight forward for a mechanic or are we talking about a project here? As I really need...
  7. A

    Well, ...... I could just cry ! Heeeeelp.

    Folks, having been the proud owner many years back of an 88" SWB 2.5 petrol, I finally ( after a white van or two ) decided that with winters the way they are, I would make a sound choice and get another series landie. I need a little space in the back for timber planking, so I looked for a...
  8. A

    Distraught new owner says hello !

    Hello all, I'd far rather be joining a forum with a newly aquired 109 Series III that worked, but hey, perhaps it only had two days in it ! Hoping that the huge resources of knowledge here will help me out amblik
Back
Top