Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. R

    Range Rover Classis Clutch / Gearbox Noise - Diagnosis Needed.

    After a recent long drive i have noticed a ticking / tapping when I slow down in 1st, 2nd or 3rd gear, especially when using the engine to slow down. It disappears completely when in 4th gear or when the clutch pedal is depressed. I can hear this noise in neutral also but alot quieter and...
  2. R

    EP90 in Borg Warner Box - Long term damage?

    Recently replaced my transfer box (chain & VCU type). The s/h unit had Ep90 in it not Dextron. I have no idea how long it had been in there. Anybody had experience with wrong oil in T-Box? What problems can i expect?
  3. R

    RRC - N/S/F Tyre Screech/Chirp/Squeal

    I have recently changed the transfer box (Borg Warner) on my 1990 RRC the old one had a stretched chain. Since putting the s/h replacement unit one on (which incidentally was filled with Ep90 when it arrived, now changed back to dextron) i have a tyre squeal (front passenger side) when...
  4. R

    RRC, Strange Clunk Noise Under Load. Suggestions Needed.

    I have a 1990 RRC with Nissan Fd35 Diesiel engine. The fault began on a day out a few months ago in the mountains, when starting off on a steep hill i noticed one load clunk. I changed many things & the fault has just got worse. I am hearing & feeling through my feet a clunking noise when...
  5. R

    Advice please - CV joint & Swivel housing & bearings

    Lovely & sunny here so i fancied a bit of tinkering ..... I want to check (clunking noise, 1 or more clunks when taking up drive uphill) & change any seals/bearings/cv joint (1990 RR) in front axle. So all is apart & cleaned, when i reassemble where do i spread my 370 odd grams of grease...
  6. R

    Poly v Rubbers bush kits ...pros & cons

    Most of my bushes (1990 RR) need changing. I can get poly or rubber bushes, poly being over twice the price of the rubber ones. Has anybody had experience with poly/rubber bushes? Is there a marked difference in handling/performance? Are they either easier to fit? Are they worth 2x or more...
  7. R

    How do i remove the rear prop? ..1990 RR.

    Hi All, I have just joined the forum and after reading lots of interesting stuff i now have a question. I have a leak from my rear axle, i assume it is from the pinion flange oil seal between propshaft & dif. So i want to pull rear propshaft off remove the pinion flange nut, pop out seal &...
Back
Top