Search results

cheers for that i'll have to have a play next weekend now lorry driver away most of week and dark when i get home if i understand it right if i were checking front right wheel unplug sensor bridge the 2 pins on the wiring loom side then take reading from pins 4 and 5 in the plug from the slabs ...

now edited previous post

I've now changed the slabs unit ( THANK YOU ) to Derwendolly But no difference still got no wheel speed readings from front wheels Rear wheel speed sensors are recording as they should When i go into sns (v) left rear wheel 2.21v when i unplug sensor 0.00v plug it back in 2.21v right front...

Ok mate no worries cheers Allan

Hi mate I will have that slabs off you let me know postage and how you want paying (PayPal or what ever ) cheers Right been doing some more investigating had nanocom plugged in no voltage from o/s/r sensor other 3 wheels 2.21 volts so unplugged sensor then voltage dropped on n/s/f sensor...

Hi been looking on bay of flees they got 3 on there 2 different part numbers 1 ending in 70 the other ending in 150 does it make any difference which one , is 1 better than the other or just stick e with same part number as mine .Also if I need it how much do you want for the spare one you have...

Sh@t 1 coil and 1 air can I just swap them over just to check wheel speeds to see if my slabs is shot then swap back cheers Allan

Hi could anyone tell me if you have to programme slabs unit into disco 2 if so can it be done with a nanocom .cos I've not cured my faults yet I've done live test with it and my wheel speeds at both front wheels stay at 1.7 kph while rear wheels go up and down as they should .I then tried...

Cheers for that

I get that I've already replaced 2 I'm looking at the reading from the nanocom am I right in thinking the sns (v) is sensor reading if so it's now showing fault with the only 1 I've not touched yet the other readings were from a generic reader the ones I've just put up are from nanocom but I'm...

Hi fellas I'm back again not used disco for a while been using other car . Now I want my disco back on the road so I've bought myself a nanocom and while having a play with it went into slabs then I think it was sns (v) I assume that is sensors both front and n/s rear wheel were at 2.19 and 2.21...

Cheers for that but apart from warranty what's the difference between this one oh and price C31-1000 BulletBatt Car Battery 12V 120Ah From Tanya

Hi could anyone tell me if this battery would be ok for my disco 2 td5 it says it's a leasure battery but ok for starting engine https://advancedbatterysupplies.co.uk/product/advanced-xd-c31-900-battery-12v/ or could anyone recommend one as the cold weather will soon be here and my car as only...

Hi guys it's me again after having faults cleared traction control still growls at me and applies brakes no abs lights or anything apart from traction control light flickering while it was growling at me I assume that's what it should do if a wheel spinning on mud or ice and applies brakes to...

Hi fellas I'm back again got fed up of playing with wires couldn't sort it so drove it about the odd time and put up with bong bong bong .I have Bean using my other car but while I was using it the traction control started growling at me and applying brakes so got fed up called auto spark out...

Sheffield. I'm home now so going to have a play with wiring tomorrow fingers crossed

I don't know . But I have one of those cheap things and that doesn't even find a fault but on my mates it shows up and it clears it but as soon as I drive it wollop it's back again so I assume if it wasn't that good it would either not show up or not clear it . Also I don't know anyone with a...

P.s could be that wiring as it only seemed to appear after a good downpour of rain

Dunno wot diagnostics it's a mates atop same as aa/race use it says little or no reading from n/s rear will check that wiring when I get chance (lorry driver hardly at home) have a look at weekend if her indoors doesn't want to go shopping (help) lol as she doesn't drive

Yup done that had fault cleared changed hub and sensor tried it fault returned had it cleared again took it for a spin fault returned wtf do I do next thanks for replies