Search results

Well I live not far North of York so, from our side of the pond to yours, cheers.

Thanks Imortim, will have a look in the next couple of days..... will let you know how it goes. Thanks everyone for your time..... as always. Ps. Fettling? You a Yorkshire lad?

Just had a quick look at the Rocky Mountain tracks you mentioned (£90). Are they easy to fit?

Thanks guys, I have downloaded the anaconda docs so can see the various parts that are involved. I was kinda hoping that some innovative fella out there has found a brilliant yet simple and cheap alternative.... that looks OK as well. Having ready some other forums on this many mention that the...

Hi there. Well, I think she is just about ready to get on the road for the first time in years. Just about to start some basic tarting up and I would very much like to replace the rear windows. I know there are various option to do so however, I would very much like some advice on what would be...

Hi everyone, thanks for responding and sorry in delay in getting back to you. Turns out, slave cylinder was upside down so not a great bleed there. Tried a reverse bleed but didn’t have much joy so turned the slave cylinder round so the bleed nipple was uppermost. Helped the clutch but still...

That is rather wizz bang.

Hi there. Got a 72 Series 3. I am really struggling to find a gear, engine on or off. However, I can always find reverse and sometimes, if I engage reverse and move a bit, I can very occasionally find all the gears. I have a new clutch in it, done by a garage but there only seems to be...

Thanks Rob, good idea that and one I will steal ta. As for parts, thanks everyone for advice..... now right into Anaconda docs and ordering parts from John Craddock. Will get some photos up when I get the parts and start fitting them.

Even worse Steve....... I put it in front of the vent levers.... it will be moved.

Thanks Steve, I had a look at that Anaconda site, very useful. Can you suggest any retailers for the parts I’m after? Please.

Hi there, I am trying to find a couple of metal plates for the gears and knobs etc. Namely (according to the Haynes manual): Transfer lever seal retainer (Hi - Lo ratio part 23) Operating rod cover plate (4WD selector part 25) I am pretty sure I can get the gators/seals but struggling to find...

Finally, what I ordered.

Gauge and bracket.

The speedo cable hole.

Some photos. The sensor with PTFE.

Hi everyone, thanks to all for responses and help/advice. So, managed to find out my early Landrover 90 engine had a 5/8 thread on the temperature sender. Contacted mini spares who checked and confirmed their capillary gauge was 5/8 as well. Here’s it fitted, working well and yesterday it showed...

Cheers Col, new rad plus 2 new thermostats (stat was our first suspect and though we might have a dodgy one from the shelf). I like the idea of a laser temp doodah though.... gonna look into that. I will get in behind the gauge and have a look for that stabiliser next week. May try and get hold...

Hi there, not sure is the short answer. The garage has stated that it’s not running hot and seems to idle nicely. They have definitely installed a defender sender and I know that the gauge is a S3 gauge. Not checked voltage etc yet, will wait to get some fuel in to see if fuel level indicator is...

After a quick clean.