Search results

I replaced the fuel pump after suffering loss of power on incline. Still the same faults but truck is much more responsive. Smokes more too now but that's possibly because of the better fuel supply to the HP pump. Anyway, had the ECU read at a garage and got these codes: The 0110 code is...

Well I got a Bosch fuel pump (Ti Automotive) same branding as the genuine old LR pump that I removed. Truck has covered 117k. Truck is more responsive now but still has the same fault. was £85 + VAT for the pump from Andrew Page motor factor. Had the codes read, FOC, and there are 3 codes...

Is this fault fuel pump? Don't have the funds to just buy an item until I find the correct one. It will be going onto some diagnostics at a garage tomorrow but they're unsure if it will.work on a freelander.

Hi, My fuel pump is possibly playing up. Can anyone confirm that WFX000181 is the correct part number for the inline pump in the O/S/R arch? Also, some pumps I've seen on eBay have a FBH. Can I fit one of these as mine has the wiring plug there for the FBH, but my current (original?!) pump...

Can't you just earth the fuse box to the body? Does it have to be on the -ve battery terminal? Have a look at caravan quick release clamps. You can get a few wires in those if that's the route you're after. Or maybe THESE? Or possibly THIS STYLE??

Here is the video link: Td4 Lack of Power & MIL

Right, due to the above comments (many thanks) I went for another drive to monitor the MIL. In 4th Gear on a long incline the light came on around 50mph. I lifted my foot off the throttle for 2 seconds and light still on, put my foot back on the throttle to accelerate up the incline and after...

This is exactly how mine was plumbed up! I replaced my vent filter during the service I gave it last week and fitted it back with two pipes. Now I realise it should only of had one hose! IRD vent pipe now removed and will test it later. Dan

Right, So the car smoked like a trooper when been laboured up a hill and the MIL would come on briefly then go out. I gave it a FULL engine service inc all of the filters. I have repaired the inlet manifold as it was split (tempory measure) and removed, checked and cleaned the top two...

Many thanks. It's the subwoofer wiring. How would one know if I should of had a subwoofer fitted as standard? It has an Alpine headunit in now. There are a few things missing from this truck.... Dan

both of my set of wheels are ET48. So will fit mine no problem.

I can remove a wheel and check what the offset is?

My old ones will be up for sale as soon as I've swapped the tyres onto them. Mine is a 2003 TD4 if that helps with the offset? lol

Sorry, 2003 TD4.

Close up of wire colours: It leads to all of the wiring where the towbar is connected to but then I can't trace any of the thin grey wires. :scratching_chin: Found it whilst hoovering out the boot. It's a 5 door model if that makes any difference. :eek: Cheers, Dan

Oh. I have just picked up some other 16" alloys for my Td4 but I didn't realize there was an ET difference. My FL has the 5 spoke alloys and the ones I've got are the triple spoke alloys. I have these: Landrover Freelander Alloy Wheel 215 65 16 With Tyre . | eBay But just bought these (not...

Cool. Well cover is back on now. Who designed such a thing?! Dan

Oh ok! many thanks, will do. I thought maybe breather was blocked and it forced the weak plastic from the machining process out. Cheers.

I have glued my manifold back together and it's holding. Although it seems it has split in more than one place and there is still a slight weep. But I left the small plastic top cover whilst driving and checking for black smoke etc. Get home, pop bonnet and there is oil splatter everywhere. It...

Yes I've already replaced the crankcase filter. Not with a BMW one as yet as I got the foam one as part of a service kit. I will replace the manifold. But hopefully a temp fix will show if this has been the root cause of poor power and turbo boost. Cheers. Dan