Search results

I have shared the pic with 2 mates who own X5's Thought others may want to do the same :p

Coming straight from the Findus Beef Lasagnes mouth (I am a UK MOT Tester) No such rule has yet been suggested or instigated regarding Class IV diesels (cars and vans upto 3000Kg) The only thing that has changed are the Max "soot" limits from 2008 onwards vehicles has been lowered If you...

Very posh but may I suggest next time you get the hired help to make your sarnies

I hope you found time for a bacon sarnie in amongst all your dawdling :D

What kept ya ?? Autodata gives 2.70 hrs start to finish :p

TD6 uses caveman technology in the thermostat dept and is a known "failure" point !

My Symptoms In warm "normal" UK weather my engine temp gauge is stable at almost half way and heater is toasty hot During the latest cold snap my temp gauge would take an age to get warm - once warm it would visibly creep down if cruising down hill (v.low revs or engine off load) and...

:D Water pump and thermostat to be done on my 2003 TD6 - Doozer :rolleyes:

Heres one I done earlier ! Pt 1 - http://www.landyzone.co.uk/lz/f10/static-when-filling-pressure-drops-when-filling-do-not-206684.html Pt 2 - http://www.landyzone.co.uk/lz/f10/static-when-filling-pressure-drops-when-filling-do-not-207207.html

BEWARE ! If and when you "wake-up" the EAS system it may send full pressure to your new air bag. Have you inspected the old air bag and determined why it burst in the first place ? If it has simply burst with no visible wear or weakness then go carefully. Live data would be my method of...

If you was that hard up for the Pound Coin that fell down your dash I would have sent you one through the post :D

Also there is a better class of pi** take on here ! :p And sestorious still cant get his suspension heights right !

Ooooooo

If your vehicle has "inboard rear shoes" then owls method should sort the job out

Ooooooo pretty pictures ! Electric Caliper Manual Caliper

Dont worry wil you didnt break it :high5: ! Everything worked well today and I checked ECU with my Solus Ultra but made sure I used the "STOP COMMUNICATION" option BEFORE removing the OBD cable Phew ! :cheer2:G:cheer2:O:cheer2:W:cheer2: :cheer2:G:cheer2:O:cheer2:W:cheer2...

Electric parkbrakes require the piston to be "wound back" (normally by a computer) because if you only "leave the parkbrake off" the piston only moves back a fraction of a nats cock to move the pad away from the disc enough not to cause it to bind When removing worn out pads the piston is...

Too right :5bwilly_nilly: My own theory is the Can Bus System doesnt like being poked with a Diagnostic Machine and needs a number of ignition key "cycles" to reset itself hence the (hopefully) 1 off message If you play with the EAS system it will throw an error message on screen but turn...

Otherwise he will break it ! :eek: I had been to VMTP this morning for oil change and Ecu check - all good no errors On the way home I called in at his Tyre Emporium and offer him the keys to my TD6 so he can see how my new TC and Cleaned out gearbox performs Well he gets in turns...