Search results

As above but if you have removed the wires and forgot then i'll look on a wiring diagram tomorrow in work

I have the original spare wheel cover and want to buy the hard plastic type and spray it the same colour as my Freelander, where is the cheapest place to buy one

"New on the back keeps your VCU slack" "New on the front ££££££££££££££££££££££££ :D

When you can't here the pump and failed to start, give the pump a gentle tap to see if it starts to work.

Free the hinge off with WD40 and then give it a good blast of spray white grease then wipe the excess off later, while you'r there give the check straps a blast to. If you are lubricating plastic or rubber use silicon spray lube.

Border line think about changing it, so they say

If one minute the clutch bit is high and next its low, and with no loss of fluid I would say is the master cylinder not returning all the way back to allow the piston to refill with fluid

If the fluid was at the same level and no leaks then I would look at the master cylinder return spring, also check the thing is venting to atmosphere via the cap.

To be honest I don't know............. I'll ask the guy in the Turkish car wash when I go there next ;)

We don't get much snow here but we do get black ice occasionally, I remember waiting at traffic lights in a defender and suddenly with the camber of the road I slipped sideways into the kerb.

you can have the best tyres in the world but in won't stop the idiot in budgets going into the back of you

£100 for a referbed injector seems expensive

It's been known for years to leave your engine idle for 10 seconds before switching off to allow your turbo to slow down but I have never seen it written in a hand book until I read the Freelander book.

How many leave their engine idle before switching off

The one wheel up test IS the best quick reference test ever and everyone should do it and post here their results. I think my VCU would have lasted a lot longer but I had a bit of spare cash and winter coming fast I thought I would change it now. insidently a freelander does not handle well in...

Reading passed posts I can see that a recon VCU usually takes about 11 sec to do the same test, I don't know where the guy who fitted it to the p-shafts gets his from but he does supply them to a local land rover garage. On close inspection the unit has been de-welded and re-welded and the ball...

Build date and first registered can be miles apart, if you buy an X military vehicle they have never been registered and can lead to confusion

1.2 meters

There is only one product I would use for a worn engine

SAL is Europe UK land rover, LN is freelander A is wheelbase B body type freelander 5 door B engine code 2.5l 4 cylinder diesel 7 gearbox 5 speed RH drive Y year 2000 A build code, solihill uk The last lot is the unique serial number