Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. tony2

    Fitting air pressure gauge

    Cheers for that Wammers, will check it out. Can you give me another clue as to the (Violet) valve block to air tank pipe ?
  2. tony2

    Fitting air pressure gauge

    Hi Wammers, It,s the tank that's loosing air. Suspension stays up ok, but after a couple of days standing it takes a good 10 mins before the height indicator stops flashing. If used every day, not a problem. Suspect N/R valve or Diaphragm. When you say Violet (sorry i'm a bit colour blind) is...
  3. tony2

    Fitting air pressure gauge

    Hi all, About to remove and reseal the valve block on my 1999 4.6 HSE as it is loosing all it's air when left for a couple of days. While i'm at it, I want to fit an inline pressure gauge. Can anyone tell me where the pipe from the valve block to the tank is located on the valve block, don't...
  4. tony2

    Dash mounted Nanocom

    It prevents the Nanocom smashing into the dash as it slides off the passenger seat. Cheaper to replace the headlamps and grill :D:D
  5. tony2

    Dash mounted Nanocom

    No different to glancing at the instruments if you know what your looking for. Yes, it warns you a "nano" second before impact, clever bit of kit :p
  6. tony2

    Cracked Block??

    Have you checked for wet carpet in drivers footwell ? If heater core o rings are leaking that would explain the slight water loss issue. My money would be on the thermostat jammed open rather than cracked block. Do as Wammers said and have a look at the plugs
  7. tony2

    Dash mounted Nanocom

    Hi all, Fitted a couple of self adhesive metal hooks to the back of my Nanocom Evo so I can observe live readings on the move. They are the easy remove type which leaves no mess from Asda.
  8. tony2

    Tyre advice

    General Grabber A/T, good for all conditions
  9. tony2

    Show us your other toys

    Photo's didn't appear......
  10. tony2

    Show us your other toys

    couple of Toy's
  11. tony2

    Yippie - plenty of smug time coming up...

    Could you pull the fuses for TC and ABS if the conditions were bad enough, then replace them later ?
  12. tony2

    Yippie - plenty of smug time coming up...

    I'm with Wammers on this one, hate the poxy stuff. Christmas Day fine, rest of the winter "**** Off"
  13. tony2

    An they let them out unsupervised

    Went to local Kwikfit to get my wheels balanced. The bloke (not a young kid ) drove it onto the ramp, raised the suspension to off road setting, left the engine running (V8) raised the ramp and started to remove the wheels. I asked why he left it running and was told because of safety...
  14. tony2

    Nanocom Evo - Praise

    Yep, Best accessory you can buy for a P38. forget ya bling L322 lights and side steps, get one of these !!!!!
  15. tony2

    How much jesus ???

    What an ugly MF !!
  16. tony2

    What did you do with your Range Rover today

    Pulled a Vauxhall Vectra out of a muddy field. It was well stuck, up to the floorpan at the front.
  17. tony2

    EAS / Nanocom Question

    No vehicle has moved message so, as you all say, it's probably the BBS equivalent. Thanks all.
  18. tony2

    diagnostic advice sought

    +1 for Nanocom Evo II, best purchase so far for a P38.
  19. tony2

    EAS / Nanocom Question

    Thanks Guy's, will do.
  20. tony2

    Orings and blend motors.... What method did you use

    WARNING......WARNING.......WARNING Don't leave them too long before you tackle the job as wet carpets will have an adverse effect on your BeCM under the seat. ask Neo for details. !!!!! The O rings are a lot easier to do than it appears.
Back
Top