Search results

I based mine on LRO mag. took the photos and got an agreed valuation from my insurance. Series 2a - HOW OLD DOES IT NEED TO BE TO BE CLASSIC?

My mates disco is lying stuck in a hole tonight after the nw Britpart swivel ball sheared off next to the flange! Having not seen how he drove into the hole, i suspect a bit gung ho, my britpart swivels on all the landys have taken the beating i give them. Maybe his was a bad part ??? Either way...

Cheers Will check connections, making sure the cable isn't shorting or a hard bend in the cable. failing that im up the road to Gaz, ;)

I've tried googling this but the only answers I get is when it all goes to plan so if anyone can help ...:confused: Just fitted a replacement aerial and trying to set up the cb with the SWR. I was following this link -...

I believe the braket bolts to the cassis and then to the rear wing. Flap hangs off it. However, remove them or tie them up if you go playing, I tore mine off. So there in the back to get re-fitted along with the front ones. If anything it's some courtesy to other road users. P.S I'm liking...

I fitted the paddocks rad muff to my TD5 last winter, no problem with over heating and good for keeping the mud out. I took it off to give it a good wash and found the metal rings crimped into the muff were pulling out. NO problems with Paddocks sending out a replacment. Going to make a muff for...

Just a thought - does anyone now the part number for the stat on the 2.5na 15J? Or have one spare? Maybe handy to have a spare.

LOL its so true that it hurts! That's the grinning from ear to ear every time we drive our Series. I just can't believe you nought one not knowing what they were like to drive, hey at least your enojying it. Get us some pics. Sounds alot better than the project I got - electric fuel solenoid...

I got my brother a set of finger spanners - where it like a ring and the socket grips the nut. Brillant for those hard to reachareas where you can't use 2 fingers. Just wish I got a set for myself :mad:

When I first noticed it, I took the thermostat out and clean it, I then gave the engine good flushing. Thermostat is shut, opens in a cup of hot water. Think I got another voltage regulator to try. Thanks for input

I prefer my 110 TD5 to my Series 2a 2.5na for technical off roading. Better articualtion of suspenseion, more responsive to the power for hill climbs. But I love the character of the Series. Both vechicles are fairly standard specs.

Stud extractors Tap set Ball joint seperator Mate with a welder Big hammer Axle stands and the list goes on

As he title says, my temp. gauge doesn't get up to normal - it used too until recently. I now bairly gets passed cold. I tested the wire / gauge by putting it straight to earth and immediatly it went to hot. I had a new temp sensor, so I fitted that & it didn't even flinch. Water temp after 8...

12v screw bulbs, similar to that of the torch bulbs in supermarket. Local hardware store

Cool beans, that's next on the list.

What is the deal wen it comes to MOT if it's been removed?

So heres the back gorund, 2000 110 TD5 Been to a driving dayand then up on axle stands todo the rear x memeber and front PTO winch. I had a deadline as I needed to get a tree which was now inside someones garage, well through the roof :eek: When doing the pto I noticed back (must check that I...

Forget your price comparison for the more specialist car. I pay the same as Admiral quoted for 3rd party but instead I get offroad driving and covered for competions. (AdrianFlux) 110 td5 with few upgrades, lights, protection & engine chip.

Oil dropping onto prop flange to get flung up. EP90 oil used and ready for top up. I shall check the breather, before checking seal.

So the unerside of the rear tub is now throughly oiled :( I replaced both fron & rear diff seals, I noticed that the nut was really horsed up on the back and I now ownder if the previous owner did this due to the leak. Ok so it could be a bad seal I fitted or something is worn. Any ideas and...