Search results

It's not cylinder head Next step is the oil cooler.

Intercooler out. Found more damage boo.. Thinking I might have found why I'm getting bubbles in the coolant without losing loads.

Does the face-lift freelander 1 Td4s have a separate auto trans cooler or is it like my previous Volvo's in the Radiator?

What a faff getting the bumper off! Typical being an end of line car I found more bolts than either the Green, Blue Haynes or the LR workshop manual suggested. Tomorrow I will be removing the intercooler (Got side tracked by a leaking caliper that had been rebuilt three times) While...

I'm planning on cleaning out the intercooler on my 06 Freelander 1 Td4. Quite a large amount of goop inside. I've read all kinds of horrors on Facebook about putting petrol through, is there a touch safer way of doing it ? I'm thinking after how badly the previous owner treated the car (They...

Found an OBDII that does everything I need thanks.

Good evening Finally rebuilt the "money pit" freelander 1 Td4. Car will not start :( "Unhappy bunny" I've been told that I need to generate around 150bar or 2000psi. What OBDII scanner will work without costing me insane amounts? Temu/Aliexpress are no goes. Will the Carsoft or Launch X431...

Good evening ladies and gentlemen. I need to pick the brains: I'm in the process of sorting my 06 Fl1 Td4. Replaced the Cam cover gasket, both injector seals rubber and copper washers, two copper weren't unplace. During this process the entire plastic air filter holder had to come off, all is...

Good evening, I have a 2006 Freelander 1 Face-lift Td4 that has a slight issue: There are bubbles in the coolant bottle when the engine is running, although a sniff test hasn't shown up exhaust gas, it's alsmot as if there is no thermostat in the car because the coolant is being cycled (is this...

They're almost the same size, just a few thousands different but will fit and bolt up as long as you don't mind the tip sheering off.

I'm in the process of refitting new suspension to my newly acquired Freelander 1 L314 Td4 auto. Previous MoTs show advisory for all the bushes. As I'm a bit too picky I'm replacing all the bushes. The dilemma is the rear driver side shaft is seized in the hub, after having a detailed...

Last time I used Halfrauds was on my, now buried 850R They caused a lot of damage after swapping the cam and crank sensor over! Thankfully I had the repair contract added to my membership so they stumped up a new engine from Volvo. Never let anything with 4 wheels and an engine near them.

I have an issue with my 06 Freelander 1. Replaced the pads. Found the dust seal wasn't in a good shape, ordered a replacement kit. Went to fit, dust seal is too large (not happy) I've now found there are two sizes 54mm and 57mm pistons, as I have one of the last FL 1's which should be the...

Evening. Planning on converting a manual Freelander 2 to Automatic. Other than the greasy, clunky bits what else do I need to know? I've been told the cranks are different. How true is this or are they referring to the auto drive plate connecting to the Torque converter in place of the clutch...