Search results

cheers fanatic ,changed the gear over this morning and all is well saved a little dosh there :)

is that swap the big gear with that of the 80 into the series motor as the motors have the same part no i am tota;;y lost as there are 2 listed for 90 alone and i am unsure of how the chassis numbers work :confused:

hi all well the chassis and electics are all ready for mot bar the wiper motor , it works but very slow and blows fuses even up to 25a ,i have tried one off a series 3 but that parks the wrong way it parks to the right meaning wipers up on drivers side , is there any way to make them travel...

can you tell me in what way they are different

hi all ,i have done a search before asking this question and found no difinitive answer , so my question is ,will i be able to fit the disco rear hubs to my 90 axle ? reason being is my drums are shot to pieces and have a disco as a donor for disk conversion , but the axle on disco is pretty...

thanks bustersbus

hi all can anyone tell me where i can get the little clip things and screws that hold the headlamp bezel on the lamp please cheers all

i think its running this Microsoft Mobile Pocket PC 2002 but hope it works

anybody got any front calipers off a landrover 90 need the o/s more than anything but will take a pair ,dont need to be working will rebuild them cheap as poss

will one of these work Hewlett Packard Compaq iPAQ h3760 PDA

try yrm metal solutions they have door frame lengths , gently bend the ally up place the new section in place tack the corners re bend the ally and you have a new door so to speak ,i am doing mine as we speak :)

i wouldnt rule out the tensioer as when its under a load it isnt as free to rattle as it would be at idle i have seen it many times on various car and they didnt throw the belt

timing belt tensioner or idler pully

its ok i have sorted it starts on the button , happy days :):)

hi all i have done a search for ftting an ignition switch but to no avail ,well not to what i need, i need the colours and where they belong on the switch in mumbers ie brown to 1 or what ever lol i have a landrover 90 which i am fitting a 200 into but there was no switch to copy the wiring...

yes i did use yrm looks like i need some extra fabrication hey ho live and learn

cheers mate will do that if i can work it out ,you have only gone and confussed the matter

hi all ,has anyone got any idea how i can wire up the twin fans off my disco 200tdi onto my 90 using the switch off the engine , i have an idea on how to but not a 100% it will work put a live feed to fans then send an earth to one side of temp switch and from the other to the chassis ...

hi all ihas anyone used the company called metal solutions for bulkhead repair panels , i have ordered an o/s lower bulkhead pillar and bulkhead repair panels , my question is i cant see the curved piece in the 2 pieces or am i wrong any help will be appreciated

aparently bearmach dont stock parts i need the clutch mech the winch has just gone past 12 months old and never been used but the clutch is stripped ,i went to use it in the snow and no go the motor spins but spool dont :(