Search results

Ok, let me know postage for four switches and PM where to send cheque or paypal if you prefer. Thanks

Ok, let me know postage and PM where to send cheque or paypal if you prefer. Thanks

If you could you post four of the toggle switches, i'd be interested.

Seem to recall reading 2.5 cam gave better performance when fitted to 2.25 and if fitted with 2.5 head allowed you to use unleaded with no adverse effect. May have been under the influence so not 100% sure. I would be interested to know if anyone has info on how to gas flow head, is it worth...

Not sure if it helps, when I remove my push bike inner tubes, I lay them on top of wheel and check tyre where puncture is to see if anything is still there to puncture fresh tube. Quite often you will get a thorn that is just poking through, don't know if that could happen with a Land Rover...

Try some of this Servisol Super 10 switch cleaning lubricant 701.100 UK Wholesale Buy from a leading uk wholesaler, importer and trade supplier works for cleaning contacts and a quick spray when changing filaments (not bulbs as you put them in the ground) really helps.

Could it not be repaired with epoxy metal.

Think I'll give the paraffin a go and wear some gloves. Thanks for replies, glad someone got a laugh out of it.

My wife has me bought a parts washer for my birthday. Toolstation > Automotive > Mechanics Tools > Parts Washer Can anyone recommend washer fluid to use, was going to try it with paraffin but not sure if there is anything better/cheaper?

Lots of good advice with pictures here. http://www.landyzone.co.uk/lz/f16/how-hand-paint-landy-pictures-152225.html

If you are saying it seems to start when you release the key to the normal running position. I had this problem when I bought mine. Previous owner had fitted a new Britpart switch that turned out to be faulty. Either check that you have a 12volt supply at the coil when starter is turning or hot...

Just did a quick search, "road closed due to flood traffic offence" it came up with this. Roles and responsibilities - Highways Agency If you were not creating any wash, then I hope karma lets you off.

Do rubber gaiters help with one shot? My worry would be keeping water and dirt out. DA3056 | Swivel Houing Gaiter Kit - rubber by Britpart/Bailcast

Hi, if you do a search you will find it has been done before. Not long ago you could buy new Defender bulkheads quite cheap and convert them to Series, not sure why Defender bulkheads suddenly went up in price. Happy New Year to all.

Not got around to it yet, but was thinking of upgrading mine. Cutting hole where original blower sits and taking air from inside cabin instead of from outside. Any thoughts?

I did originally phone LR Fasteners and got a price of £15 which included postage. Series is sat in garage slowly being taken apart and then put back together replacing what I think it really needs and making a note of what it will need at some point in future. Only knew they were missing after...

Thanks for info, was trying to save a few quid for other bits. Am I right in thinking that there is 2 per fixing (6 in total needed)and would top hose rubber be about the right thickness or do I need something thinner?

My series 3 is missing the rubber isolating packing that goes between slam panel and chassis to reduce vibration to the radiator. I think part number is 90306465 can anyone tell me if I could make some out of the rubber from an old top hose.

If you can get hold of a Halfords trade card you can save quite abit on retail price.

Hi, don`t know how close you are to Thetford. but you could have a look here. Untitled Very helpful when I called.