Search results

manual winder fits no probs, cut hole to match old panel.i had beige handles, but got a pair from rover 25 works fine. handles and plugs i should be able to get next time i am up, i have 1 spare plug at moment but cant mind bit that it fits, you can have it for free

it may be a bodge, but if your in malaysia theres not many options, and it works,as for harder to change,smash your old light up and remove old plug and wiring, and fit it into new light, that way you can still unplug it

Hi one of the first ones i done, i could not get the plugs, so just wirsd my original wiring straight into light. remove plug connector from new lights, check where wires go and remove connector. remove your connector and join the wires

Door Panels part 3 If you decide that you want the door switches, and central locking switches to work, then this is how to do it, not a hard job,but you have to watch what you are doing. you will already have the switches from the door cards, you also need to take both front door wiring...

Door Panels part 2 The handles for pulling the door closed,are secured by either 2 heavy screws,use original ones from old handles,and in which case just drill some 1/8th holes, this works fine, or for a more stronger fixing use rivnuts available from ebay. If this is as far as you want to go...

DOOR PANELS part 1 When doing the door panels, you must also get the inside door opening handles, also it makes it slightly easier if you can get the wire that runs between the handle and central locking unit, although you can adapt your own wire to fit new handle. Central locking units are...

SEATS Changing the seats to the new style ones is straight forward, all bolt holes line up and fit perfectly, no problems whatsoever, seatbelts all fit,as do wiring plugs for the pretensioners,anyone can do this, its so easy. When looking for an interior you can use any 3door or 5 door...

Hello, carrying on from my last posts, i am now going to cover fitting the new style interior into your vehicle. It is nice having the outside of the vehicle looking like the new style, but the illusion is ruined when you open the door and see the dated looking interior on earlier models, not as...

Both bulbs are exactly the same H7's

seats fit in no trouble whatsoever, bolt for bolt.by door shells i take it you mean door panels, these also fit with some slight modification, get door handles and cables to make it easier, and to push the boat out why not fit dash at same time

Hi read my thread "2004 freelander upgrade,this is how its done" straight forward no real hassles,central locking and window wiring done. Next step is the dash Stuart

you need cables,slightly different fitting to yours, although may be able to convert send me pm with your email address and i will photograph them tomorrow,and send you it and see what you think yourself. i will have a look myself to see if you can use originals. Will try my guy to see what he...

Hi rear door cards have 2 black plastic locating dowels sticking out at top, remove these, goes straight on no further cutting of rear panel front panel remove the one sticking out at top drill out old handle, and cover aperature with masking tape, put panel on door, fit handle cover and mark...

Not sure how to put pics on thread but if you go to freelander gallery, you will see pics there

After facelifting a couple of these on the outside, i have decided to turn my attention to the inside, i have just done the door panels, very easy to do,When you get panels make sure you get the interior pull handles as well. Drill pop rivets out of old handle and mount new handle, mounts...

Sorry forgot to mention £40.00 each

Regarding rear bumper not sitting right, there are 2 slightly raised bits below body lights, which need hammered in, do it a bit at a time,need to go down about 4-5 inches with this. I take it you have removed the L shape brackets. I have a couple of the back tailgate plastic panels if anyone...

i have one on my 18 petrol, converted from v6 0ne

could be needing bled, or have sticky valves, anyone down your way have a nanocom, testbook or similar

Has anybody attempted this conversion, i thought i could try and get a hold of the guy from the peugeot 206 advert with his hammer and elephant, see if he could convert mine LOL sitting here bored waiting on my iphone update