Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    Help !

    Thanks for advice happening more often though only at 1500 revs or slowing down not at speed atb Charlie
  2. C

    Help !

    Hi All Spent the past couple hours trolling through various posts ! The problem I have is a intermittent loss of power, the engine management light coming on for a second then alls fine ! Local garage reckoned EGR removed ,cleaned returned as OK but it still persists ,drove for 70...
  3. C

    EGR Removal

    many thanks atb Charlie
  4. C

    EGR Removal

    Hi all as someone with little mechanical nouse I need to replace the above what tools nedded to do the following job ? atb Charlie:o:confused::confused:
  5. C

    noise when accelerating from front prop

    Hi there I have a 05 td4 when accelerating getting noise and vibration through steering wheel . When driving in normal traffic ok on motorway the noise starts atb Charlie:scratching_chin:
  6. C

    Tyre help

    Hi All just purchased a 05 TD4 the tyres fitted are 225x55x17 looking to use up the farm for shooting outings .What size a/t tyres are best for this occasional use ? :confused: atb Charley
  7. C

    Asisted ascent and descent on gear stick

    Hi All looked at a td4 in garage on startup green descent landy sign appears but no yellow one next to it Then green goes out on pushing down collar on gear stick, no light comes up on moving of still nothing lightwise comes up is this right ?:doh...
  8. C

    Water pump question

    Thanks for info just noticed every now and then the water expansion bottle losing water so I gather its either the pump or a leak ? atb Charlie :confused: :confused:
  9. C

    Water pump question

    Hi All just a quick question with the engine running should there be a flow of water from pipes in expansion bottle ie water coming out of top pipe ?This is on a 1.8 k engine ?read a lot of posts but dont seem to see answer ? :confused::confused: atb Charlie
  10. C

    Missfire on starting up

    Thanks to all with the advice given I was able to see the problem and not be led down a dearer fix atb Charlie:mil4:
  11. C

    Missfire on starting up

    Hi All When starting up the engine has a miss but when revving it dissapears, called AA engineer came had a gander looked at coil packs , revved engine recomended changing one coil pack and 4 spark plugs as a start ! He didnt have the parts nor did any other vehicle in the area so towed me...
  12. C

    Tyre Pressure 215 x80x15

    Cheers all :D atb Charlie
  13. C

    Tyre Pressure 215 x80x15

    Hi got a freelander fitted with the above anyone now the tyre pressure ? atb Charlie :o
  14. C

    Stripped Spark Plug

    This has bound to have been on here before but cant find it ? Called AA they found No 3 plug loose tried to tighten no joy took out No 2 fitted into 3 reckoned to be just holding replaced spark plug in 2 got running The local garage reckons its possible to Heli Coil without head removel as...
  15. C

    Tapping noise top of engine

    Sorry :confused:1.8 k series petrol
  16. C

    Tapping noise top of engine

    Hi There As above I dont think its the cams as it doesnt sound like a helicopter, I had to have the head gasket replaced last year and it was there then ,now it seems louder it rises with increase in throttle and decreases when throttle decreses ideas...
  17. C

    Torx bolts on cam cover stripped ?

    Hi all the bolts holding the cover over the cam 2 out of 3 are stripped whats the answer ? Helicoils, tap head etc :confused:
  18. C

    Removing Radio/Cassette

    Hi All the answer was the allen keys many thanks Charlie
  19. C

    Removing Radio/Cassette

    Hi perhaps my discription was misleading there is only 1 hole each side of unit so these tools for removing unit with 2 holes each side wont work
  20. C

    Removing Radio/Cassette

    Hi All In my freelander 1 theres a radio/cassete this has two holes one on each side for removal tried coat hanger wire,3,25 rods ,screwdrivers nothing seems to enter and release the unit any ideas please :confused:
Back
Top