Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. pete12345

    P38A Quick eas question.

    Good luck
  2. pete12345

    P38A Heater

    I didn’t change the temperature much just little to see I’ve they moved
  3. pete12345

    Wiring connectors help

    Think they been added they not on mine
  4. pete12345

    P38A Heater

    Pics changed values
  5. pete12345

    P38A Heater

    I did that you can see in two of the pics the blend motor numbers are different + they change when I push the auto button
  6. pete12345

    P38A Heater

    Got some live data I’ve it means anything to you Kermit just a load of digits to me
  7. pete12345

    Wiring connectors help

    The blue ones don’t ring a bell where abouts on the car are you working
  8. pete12345

    P38A Quick eas question.

    One you fit new ones you have to calibrate again
  9. pete12345

    P38A Heater

    Cheers kermit
  10. pete12345

    P38A Heater

    That is when I’ve worked out how to do live data on the hevac
  11. pete12345

    P38A Heater

    I thought I could hear it moving I will try it on live data thanks
  12. pete12345

    P38A Heater

    The sarga continues nxt week got work for few nights now so no time
  13. pete12345

    P38A Heater

    Connected eventually calibrated still no joy blowing cold drivers side
  14. pete12345

    P38A Heater

    Will give it another try cheers
  15. pete12345

    P38A Heater

    Saying nanocom can’t connect to ecu
  16. pete12345

    P38A EAS Fault finding threads or files.

    You can do it with nanocom but its easier with blocks then use nanocom to read heights and save you can only increase or decrease a couple of bits at a time
  17. pete12345

    P38A Heater

    Tried nanocom this morning connecting to all ecus ok except hevac to try to calibrate stumped now any ideas would be helpful
  18. pete12345

    P38A Heater

    Thanks for advice will do a calibration on nanocom in the morning
  19. pete12345

    P38A Heater

    My heater is only blowing hot out of passenger side cold out drivers side any suggestions much appreciated I have a nanocom I’ve that helps +3 new blend motors fitted
  20. pete12345

    Heater Matrix Removal RHD P38

    I’ve you,ve taken old one out just replace it with the Audi one no o rings to worry about in the future same as paulp38 did
Back
Top